Has anyone got Unifi Talk working with the VOIP Unlock Key and the UT-ATA-878F device? This is currently working fine on my Linksys PAP2T device but I want to port it over to my new UT-ATA-878F. Anyone know all the settings needed?
Unifi talk and UT-ATA-878F
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
- Liptonbrisk
- Technical Support
- Posts: 2773
- Joined: 04/26/2010
- SIP Device Name: Obihai 202/2182, Groundwire
- Firmware Version: various
- ISP Name: FTTH
- Computer OS: Windows 64 bit
- Router: Asuswrt-Merlin & others
Re: Unifi talk and UT-ATA-878F
Since no one else has replied (and since I can't find a manual), I'll just guess.
First, visit https://support.freephoneline.ca/hc/en- ... redentials
Password is FPL SIP Password from https://www.freephoneline.ca/showSipSettings.
Username is FPL IP Username from https://www.freephoneline.ca/showSipSettings.
retry-seconds is 120
expire-seconds is 3600
register-transport is udp
There should be a setting to send Keep-alives every 20 seconds. Maybe the device does that at defaults anyway.
First, visit https://support.freephoneline.ca/hc/en- ... redentials
Password is FPL SIP Password from https://www.freephoneline.ca/showSipSettings.
Username is FPL IP Username from https://www.freephoneline.ca/showSipSettings.
retry-seconds is 120
expire-seconds is 3600
register-transport is udp
There should be a setting to send Keep-alives every 20 seconds. Maybe the device does that at defaults anyway.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.