Page 1 of 1

Does any know to set up Grandstream HT-496 Device

PostPosted: 02/23/2014
by Mark
Does any know to set up Grandstream HT-496 Device

Re: Does any know to set up Grandstream HT-496 Device

PostPosted: 02/24/2014
by Funkytown
Start off by connecting one ethernet wire from the wan side of the Grandstream to your router or modem.
Make sure there's indication that your Grandstream has power.
Connect a phone to the back of your Grandstream device
Pick your phone up and just dial *** then dial 02
Copy the IP that it read out to you and place it in your browser and then press enter
You should be taken now to the Grandstream web interface and this is where you will setup a phone number.
To login to your Grandstream "admin" is the default username
I recommend you if it's your first time, change the default password within advance settings and then click apply+reboot for the new password to take immediate effect.