Looking for Setting for Panasonic KX-TGP551

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Looking for Setting for Panasonic KX-TGP551

Postby mycomputers » 06/25/2014

The issue is the previous post for Panasonic KX-TGP551 is outdated or missing a few options

I'm having difficulty finding the registration timings for this device to make FPL's requirements

can anyone assist?
Just Passing Thru
Posts: 4
Joined: 06/21/2014
SIP Device Name: TPA550
ISP Name: Bell
Computer OS: Windows 7
Router: Bell

Re: Looking for Setting for Panasonic KX-TGP551

Postby bridonca » 06/25/2014

I am using this as a rough template, as I do not have a .KX-TGP551 on hand. http://www.anveo.com/faq.asp?code=sip_kx-tgp500 Hopefully. your KX-TGP551 has comparable settings.

You should probably disable the keep alive interval by setting it to zero.

I was checking for the RTP settings in the manual, on page 75, http://www.panasoniccloud.com/wp-conten ... _Guide.pdf Set up RTP to an available port, port 14000 seems as good as any, and usually nothing else uses it. Then make sure your router forwards that port to the ATA.
User avatar
Technical Support
Posts: 1208
Joined: 11/16/2009
SIP Device Name: Netgear WGR615V
Firmware Version: latest
ISP Name: Eastlink
Computer OS: XP

Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 3 guests