HT701 firmware 1.0.6.1
Posted: 08/06/2014
Credits to Val, thank you for your help.
The attached PDF will help you set up your HT701 firmware 1.0.6.1 device from scratch. It is a known working configuration so if you are having troubles with your HT701 firmware 1.0.6.1 reset back to defaults and follow this guide.
Edit by LiptonBrisk: Set “SIP Registration Failure Retry Wait Time” to 120 seconds.
Enabling "Allow Incoming SIP Messages from SIP Proxy Only" is a good idea for preventing SIP scanners/hackers. However, you may want to change that setting to "No" because FPL to FPL and Fongo to FPL calls may not work with that setting enabled, depending on the server being used and how switches FPL uses are configured. Fongo Home Phone has this setting disabled.
Do what Mango wrote below..
The attached PDF will help you set up your HT701 firmware 1.0.6.1 device from scratch. It is a known working configuration so if you are having troubles with your HT701 firmware 1.0.6.1 reset back to defaults and follow this guide.
Edit by LiptonBrisk: Set “SIP Registration Failure Retry Wait Time” to 120 seconds.
Enabling "Allow Incoming SIP Messages from SIP Proxy Only" is a good idea for preventing SIP scanners/hackers. However, you may want to change that setting to "No" because FPL to FPL and Fongo to FPL calls may not work with that setting enabled, depending on the server being used and how switches FPL uses are configured. Fongo Home Phone has this setting disabled.
Do what Mango wrote below..