Cisco 7941 or 7975 configuration

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Cisco 7941 or 7975 configuration

Postby etoghi » 12/04/2015

I hope someone can help here as I followed another thread here about Cisco 7941 configuration step by step and it did not work.
I am a network guy and I'm sure I did whatever they suggested and no luck.
Appreciate if someone who has used any Cisco phone like 7941, 7970/or 7975 can help me here. Thank you.

Sent from my Galaxy Nexus using Tapatalk
etoghi
Just Passing Thru
 
Posts: 7
Joined: 10/21/2015
SIP Device Name: Cisco 7975
Firmware Version: SIP75.8-3-4SR1S
ISP Name: Bell
Computer OS: Windows 7
Router: DD-WRT

Re: Cisco 7941 or 7975 configuration

Postby cineplex.1 » 04/15/2017

Hi, did you get your cisco phone working with Sip on Fongo ?
cineplex.1
Just Passing Thru
 
Posts: 7
Joined: 04/15/2017


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 23 guests