Grandstream HT802 configuration
Posted: 09/28/2021
I have attached the HT802 config for future users
Fongo powers free calling solutions for a number of brands. This forum includes information and tips on all of those offerings. Note that your specific services may vary based on the specific Fongo product that you're using.
https://forum.fongo.com/
1. Please indicate where to enter SIP Username and SIP Password. Thanks.TankCla wrote:I have attached the HT802 config for future users
TankCla wrote:I have made the last recommended changes and I also made notes on the pdf where SIP user & pass should go.
Thank you for your help
Enabling "Prefer Primary SIP Server" means the account will register to the primary SIP server if registration with Failover SIP server expires.jenom wrote:Since "Prefer Primary SIP Server" is set to NO, maybe it is a good idea to add the "Failover SIP Server=voip2.freephoneline.ca
I know, some may say, if one server goes down, the second one will likely go down too, or not ?
Leave at default. It doesn't matter that much because the ATA will will eventually continue to re-transmit until a 2 second (4*T1) timeout is reached.Some forum user reported that SIP T1 Timeout 0.5 sec is too agressive, suggesting to set to 1 sec
Does the "#" button function as Redial while a call is active? That seems unlikely, unless a bug is present.Use # as Redial key: YES
Often when I enter account numbers, credit card numbers, etc....I need to press the number # sign at the end; Redial would create a problem
Better to have as : NO
Disable # as Redial key: NO
this sounds like a duplicate line, same a previous, better to have it :YES
20 Hz is correct for North America.Ring Frequency: 20
I think it should be 25 HZ, or maybe some phones would not ring