VDV21-VDV22-VDV23

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

VDV21-VDV22-VDV23

Postby jenom » 03/26/2023

In my opinion, the VDV-21 is one of the best value ATA available, and it's even have an LCD display to show all kind of information.Make it work is not easy, you have to start on website voipfan.net/unlock.php
Follow the instructions, however at the end the provisioning with an xml file can be done differently.
Google for "baby-web-server" and it can be used on a Windows PC to upload the provisioning xml.file.
Attached is the working FPL provision XML file, rename filename to "brcm<device-mac-address>.xml and just change your FPL info >username/password< (use notepad/notepad++/textpad)
The settings are for North-American 10 digit local/long distance dial, and EST timezone.
Attachments
brcm-macaddress.txt
(7.18 KiB) Downloaded 277 times
vdv21.jpg
vdv21.jpg (20.55 KiB) Viewed 5921 times
jenom
Active Poster
 
Posts: 97
Joined: 01/03/2012
Location: Mississauga, Ontario, Canada
SIP Device Name: VDV21
ISP Name: Acanac VDSL
Computer OS: Windows 7 Ultimate
Router: Linksys-EA6900-XWRT-VORTEX

Re: VDV21-VDV22-VDV23

Postby Liptonbrisk » 03/26/2023

I think <regRetryTimer>3600</regRetryTimer> is the failed registration retry timer, which means after a failed registration attempt, the ATA waits an entire hour (3600 seconds) before attempting registration again, which is way too long.

regRetryTimer may need to be 120 seconds.

https://support.freephoneline.ca/hc/en- ... redentials
"Failed Registration Re-Try Interval: 120 seconds"

I'll sticky your thread.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2763
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: VDV21-VDV22-VDV23

Postby jenom » 03/26/2023

thank you for your input, I was not sure if those numbers are seconds or milliseconds.
corrected xml file accordingly, and re-attached again to first post
forgot to mention, there is also a nice looking xml file viewer/editor program called "xml notepad" by Microsoft (https://microsoft.github.io/XmlNotepad/)
jenom
Active Poster
 
Posts: 97
Joined: 01/03/2012
Location: Mississauga, Ontario, Canada
SIP Device Name: VDV21
ISP Name: Acanac VDSL
Computer OS: Windows 7 Ultimate
Router: Linksys-EA6900-XWRT-VORTEX

Re: VDV21-VDV22-VDV23

Postby Liptonbrisk » 03/26/2023

I still see <regRetryTimer>3600</regRetryTimer> in brcm-macaddress.txt

I also see <voicemailSubscribeInterval>86400</voicemailSubscribeInterval>


There is no subscription for Freephoneline voicemail. Freephoneline sends unsolicated Message Waiting Indicator (MWI).
MWI subscribe should not be enabled for FPL.

However, just because voicemailSubscribeInterval is defined doesn't necessarily mean that voicemailSubscribe (MWI subscribe) is enabled.
So <voicemailSubscribeInterval>86400</voicemailSubscribeInterval> may not be a problem. I don't know since I don't have a manual for this ATA or anything to refer to.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2763
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: VDV21-VDV22-VDV23

Postby jenom » 03/26/2023

you are right, it was a duplication and in a wrong section, corrected and re-uploaded file
added also the <tone> section, where the tones can be edited for different events
formula goes something like this: frequency 1 - volume, frequency 2 -volume, duration , etc....
This xml file configuration just overrides some of device default settings; if a setting is not mentioned here, the default setting will be used.......Permanent configuration (defaults), .....Dynamic configurations (user)
Attachments
brcm-macaddress.txt
(7.18 KiB) Downloaded 289 times
jenom
Active Poster
 
Posts: 97
Joined: 01/03/2012
Location: Mississauga, Ontario, Canada
SIP Device Name: VDV21
ISP Name: Acanac VDSL
Computer OS: Windows 7 Ultimate
Router: Linksys-EA6900-XWRT-VORTEX

Re: VDV21-VDV22-VDV23

Postby Liptonbrisk » 03/26/2023

jenom wrote:you are right, it was a duplication and in a wrong section, corrected and re-uploaded file)


Thank you
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2763
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 21 guests