Re: GrandStream HT-502
Posted: 10/24/2010
I got some time and I studied the manual; could someone explain what means "Open a web browser, type in the WAN side IP address – for example:
http://HT502-WAN-IP-Address".
Can I do this with "wan enable" I mean that function sequence-*** 12 WAN Port Web Access Press “9” to toggle between enable / disable" through phone and for wan access to plug the pc into wan port and than type that ip address that is given when i dial ***02; or how?
What would happen if I plug ata direct into Rogers modem bypassing router just to see if I can get the login windows of ata of course pluging a pc in lan port? would in this case the default 192.168.2.1 for router be used for ata because when I did the configuration I changed to that address no.
I cannot play today with these options or testings due to personal reason, I will try tomorrow, I will keep you posted.
By the way freephoneline is working very nice it seems that the quality is comparable with Bell or Rogers, no distortion, no other sounds, nothing, no missing rings or going directly in voicemail.It happened before with vbuzzer and every time I had to restart the ata and all got ok for a while.The only issue is that if the software is open the phone doesn't ring only pc software, vbuzzer it doesn't matter both are ringing and working in the same time. What can I do you cannot have all only for $50 for lifetime.
Funkytown settings were the best, hopefully I will not mess anything playing with my ata, router and who knows what else.
Have a good weekend!
http://HT502-WAN-IP-Address".
Can I do this with "wan enable" I mean that function sequence-*** 12 WAN Port Web Access Press “9” to toggle between enable / disable" through phone and for wan access to plug the pc into wan port and than type that ip address that is given when i dial ***02; or how?
What would happen if I plug ata direct into Rogers modem bypassing router just to see if I can get the login windows of ata of course pluging a pc in lan port? would in this case the default 192.168.2.1 for router be used for ata because when I did the configuration I changed to that address no.
I cannot play today with these options or testings due to personal reason, I will try tomorrow, I will keep you posted.
By the way freephoneline is working very nice it seems that the quality is comparable with Bell or Rogers, no distortion, no other sounds, nothing, no missing rings or going directly in voicemail.It happened before with vbuzzer and every time I had to restart the ata and all got ok for a while.The only issue is that if the software is open the phone doesn't ring only pc software, vbuzzer it doesn't matter both are ringing and working in the same time. What can I do you cannot have all only for $50 for lifetime.
Funkytown settings were the best, hopefully I will not mess anything playing with my ata, router and who knows what else.
Have a good weekend!