Page 1 of 1
Freephoneline on Explornet
Posted: 05/12/2014
by domptg
Is FPL working on Explornet? Anyone has any suggestions how to get it working? What about Linksys PAP2 proper set up?
Re: Freephoneline on Explornet
Posted: 05/12/2014
by bridonca
Neither my favourite ISP or ATA.
Try this. Set your ATA to use SIP port 6060 instead of 5060. Try voip4.freephoneline.ca and see what happens. Make sure you have the router/modem map ports 16384 to 16482 from the router to the PAP2 ATA, so that incoming connection know where to go. Power down the modem ATA, and router, and then power them up after 30 seconds. Hopefully you get better results.
Re: Freephoneline on Xplornet
Posted: 05/14/2014
by domptg
My ATA PAP2T worked well on Rogers for 3 years and now I use same ATA same settings on Xplornet. I connect everything and my ATA registers and I have the dial signal. The only problem is that when I talk to other person on the phone my voice is cutting down so the other person cannot understand what I'm saying. I can hear the other person very well so I thing there is the problem with outgoing connection. Ports 10000-13001 and 5060-6061 open on my TP-Link router. Anybody has the idea what to change to get this working again?