yes I agreelaurent wrote:Nimbuzz is an SIP client that works with FreePhoneLine (but lacks DTMF)cu2o2o2 wrote:I just double-checked to make sure this is the Freephoneline forum!
Oct 6, 2010 Upgrade-Related Bugs
- bedihardeep
- Quiet One
- Posts: 47
- Joined: 10/06/2010
- SIP Device Name: SPA 1001
- Firmware Version: 2.0.1
- ISP Name: Bell Fibe
- Computer OS: windows 10 Pro
- Router: bell homehub 3000
- Location: Brampton ,Canada
Re: Nimbuzz is not working
Re: Oct 6, 2010 Upgrade-Related Bugs
Ever since the upgrade, at times on incoming calls, the caller gets a fast busy... Outbound, I can get my voicemail at all times, but no calls can be made that fall outside the freephone network.
I have 3 SIP accounts all are the same..
I'm using SIP... Are others having this issue as well?
I have 3 SIP accounts all are the same..
I'm using SIP... Are others having this issue as well?
-
- Just Passing Thru
- Posts: 14
- Joined: 06/06/2010
- SIP Device Name: PAP2T NA
- Firmware Version: 5.1.6
- ISP Name: Rogers Cable
- Computer OS: Windows 7, XP, Ubuntu 10
- Router: Asus Rt-N16 (DDWRT)
Re: Oct 6, 2010 Upgrade-Related Bugs
Any news?
its been 3 weeks
still no vm notifications
its been 3 weeks
still no vm notifications
-
- Just Passing Thru
- Posts: 14
- Joined: 06/06/2010
- SIP Device Name: PAP2T NA
- Firmware Version: 5.1.6
- ISP Name: Rogers Cable
- Computer OS: Windows 7, XP, Ubuntu 10
- Router: Asus Rt-N16 (DDWRT)
Re: Oct 6, 2010 Upgrade-Related Bugs
MWI confirmed working in X-lite
will confirm on PAP2T when i get home
will confirm on PAP2T when i get home
- bedihardeep
- Quiet One
- Posts: 47
- Joined: 10/06/2010
- SIP Device Name: SPA 1001
- Firmware Version: 2.0.1
- ISP Name: Bell Fibe
- Computer OS: windows 10 Pro
- Router: bell homehub 3000
- Location: Brampton ,Canada
Re: Oct 6, 2010 Upgrade-Related Bugs
voice mail indicator working 6 pm EST confirmed
thanks FPL team for your efforts
thanks FPL team for your efforts
-
- Just Passing Thru
- Posts: 14
- Joined: 06/06/2010
- SIP Device Name: PAP2T NA
- Firmware Version: 5.1.6
- ISP Name: Rogers Cable
- Computer OS: Windows 7, XP, Ubuntu 10
- Router: Asus Rt-N16 (DDWRT)
Re: Oct 6, 2010 Upgrade-Related Bugs
confirmed working on PAP2T
-
- Quiet One
- Posts: 27
- Joined: 10/23/2010
- SIP Device Name: Thomson TG784 & 780
- ISP Name: Fibernetics
- Router: Thomson TG784 & 780
Re: Oct 6, 2010 Upgrade-Related Bugs
For those of you that it is working now please share your settings. I have a pre-configured Thomson TG784 3-in-1 device which was purchased here and MWI is still not working for me. I used telnet to access the hidden settings of the modem and found that the (Notifier address = 0.0.0.0:0) was not filled out in the voice/sip/ section despite having the (Network MWI type = sollicited) in the voice/services section. It was my understanding that if the MWI network type was set to sollicited you also had to supply a Notifier address? I tried setting it to voip.freephoneline.ca:5060 but without any success. For the ones that are working, could someone confirm what your notifier address is?
I have also tried setting the Network MWI type to Unsollicited but without any effect.
I have been using FPL as my main phone at home and having no MWI is not very convenient.
OFF TOPIC:
1) Did anyone find out how to modify the "Ring Tone Voltage" on a TG784 ??? I would like to lower it slightly.
2) By telnet-ing into the voice/codec section of the TG784 and forcing the use of g729a by disabling all other codecs, incoming calls stop ringing the phone and goes straight to voicemail. Outgoing is fine however. Everything works normally when doing the same with 711u. This seems to be a bug....
Thanks for any advice.
I have also tried setting the Network MWI type to Unsollicited but without any effect.
I have been using FPL as my main phone at home and having no MWI is not very convenient.
OFF TOPIC:
1) Did anyone find out how to modify the "Ring Tone Voltage" on a TG784 ??? I would like to lower it slightly.
2) By telnet-ing into the voice/codec section of the TG784 and forcing the use of g729a by disabling all other codecs, incoming calls stop ringing the phone and goes straight to voicemail. Outgoing is fine however. Everything works normally when doing the same with 711u. This seems to be a bug....
Thanks for any advice.
-
- *Go-To Guy*
- Posts: 532
- Joined: 08/06/2010
- SIP Device Name: Grandstream HT-502
- Firmware Version: 1.0.1.63
- ISP Name: DSL TekSavvy
- Computer OS: OSX Snow Leopard
- Router: Linksys WRT54GL w/tomato
Re: Oct 6, 2010 Upgrade-Related Bugs
Works for me too:
Glad it's resolved!
Qwerty, why would you want to change the ring voltage?
About the codecs, I think G729a is only available outbound (from us to FPL) while inbound it's other codecs that are used.
Code: Select all
Oct 23 09:35:05 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Received SIP request NOTIFY (0)
Oct 23 09:35:05 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Dispatching event: 37 (SIG_MWI) on port -1:-1
Oct 23 09:35:05 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Voice mail for acct 1: 1/0
Qwerty, why would you want to change the ring voltage?
About the codecs, I think G729a is only available outbound (from us to FPL) while inbound it's other codecs that are used.
-
- Active Poster
- Posts: 59
- Joined: 06/24/2009
- SIP Device Name: PAP2T,SPA3102,RT31P2
- ISP Name: Acanac
- Computer OS: vista
Re: Nimbuzz is not working
cu2o2o2 wrote:I just double-checked to make sure this is the Freephoneline forum!ogammo wrote:Nimbuzz is not working anymore
when i try to connect , it says wrong user name or password is not correct.
it was working before without any problems
you think you are funny, but no you are silly
-
- Active Poster
- Posts: 59
- Joined: 06/24/2009
- SIP Device Name: PAP2T,SPA3102,RT31P2
- ISP Name: Acanac
- Computer OS: vista
Re: Nimbuzz is not working
for both of you silly boysbedihardeep wrote:yes I agreelaurent wrote:Nimbuzz is an SIP client that works with FreePhoneLine (but lacks DTMF)cu2o2o2 wrote:I just double-checked to make sure this is the Freephoneline forum!
what is wrong if i used freephoneline with nimbuzz software. is it that difficult for your stupidty to understand it.
i am sure it is
-
- *Go-To Guy*
- Posts: 532
- Joined: 08/06/2010
- SIP Device Name: Grandstream HT-502
- Firmware Version: 1.0.1.63
- ISP Name: DSL TekSavvy
- Computer OS: OSX Snow Leopard
- Router: Linksys WRT54GL w/tomato
Re: Nimbuzz is not working
That's the spirit! Throw in a few insults here and there, that ought to shake us into fixing your important problem right?ogammo wrote:for both of you silly boys
what is wrong if i used freephoneline with nimbuzz software. is it that difficult for your stupidty to understand it.
i am sure it is
Nope, it doesn't.
-
- Just Passing Thru
- Posts: 21
- Joined: 02/01/2010
- SIP Device Name: PAP2-NT
- ISP Name: teksavvy
- Computer OS: windows 7 64bit
Re: Oct 6, 2010 Upgrade-Related Bugs
Hi,
Current bugs:
-when I call, it's anonymous name
-my voicemail password doesn't work, and whenever I go to admin options to store a new one, it saves, but then resets by itself to "none"
-i can't use a recorded name for voicemail
-forwarding voicemails to emails no longer works. actually whenever I save my preference from the FPL control panel, it just keeps on reverting to "none"
Current bugs:
-when I call, it's anonymous name
-my voicemail password doesn't work, and whenever I go to admin options to store a new one, it saves, but then resets by itself to "none"
-i can't use a recorded name for voicemail
-forwarding voicemails to emails no longer works. actually whenever I save my preference from the FPL control panel, it just keeps on reverting to "none"
-
- Active Poster
- Posts: 59
- Joined: 06/24/2009
- SIP Device Name: PAP2T,SPA3102,RT31P2
- ISP Name: Acanac
- Computer OS: vista
Re: Nimbuzz is not working
who wants your null knowledge to fix any problem.laurent wrote:That's the spirit! Throw in a few insults here and there, that ought to shake us into fixing your important problem right?ogammo wrote:for both of you silly boys
what is wrong if i used freephoneline with nimbuzz software. is it that difficult for your stupidty to understand it.
i am sure it is
Nope, it doesn't.
go play with your toys
-
- Tried and True
- Posts: 330
- Joined: 09/21/2010
- SIP Device Name: PIAF/Mitel/PolyCom/Cisco
- Firmware Version: Asterisk 1.8
- ISP Name: Rogers
- Computer OS: CentOS/Windows2008/Win7/Android
- Router: pfSense/Neoware thin client
- Location: Ottawa
Re: Oct 6, 2010 Upgrade-Related Bugs
You will need to contact FPL-Steve or support to fix this, nothing you can do about it.dutty.persian wrote:Hi,
Current bugs:
-when I call, it's anonymous name
-my voicemail password doesn't work, and whenever I go to admin options to store a new one, it saves, but then resets by itself to "none"
-i can't use a recorded name for voicemail
-forwarding voicemails to emails no longer works. actually whenever I save my preference from the FPL control panel, it just keeps on reverting to "none"
-
- *Go-To Guy*
- Posts: 532
- Joined: 08/06/2010
- SIP Device Name: Grandstream HT-502
- Firmware Version: 1.0.1.63
- ISP Name: DSL TekSavvy
- Computer OS: OSX Snow Leopard
- Router: Linksys WRT54GL w/tomato
Re: Nimbuzz is not working
Obvious troll is obvious.ogammo wrote:who wants your null knowledge to fix any problem.
go play with your toys
-
- Quiet One
- Posts: 27
- Joined: 10/23/2010
- SIP Device Name: Thomson TG784 & 780
- ISP Name: Fibernetics
- Router: Thomson TG784 & 780
Re: Oct 6, 2010 Upgrade-Related Bugs
Laurent, I want to lower ring voltage because I have read that it could assist with the "high pitched buzz" that I am hearing on the line. I have called help support but got a bag-full of excuses on why this could happen and how it was probably caused by my setup. Honestly support seems better on this forum. So that you know, yes I am using a wireless phone however signal is clear when it is hooked up to the traditional line. I have tried changing codecs but it made no difference, and disabling the wifi on my 3-in-1 router didnt help either. Anyone, any ideas???laurent wrote:Works for me too:Glad it's resolved!Code: Select all
Oct 23 09:35:05 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Received SIP request NOTIFY (0) Oct 23 09:35:05 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Dispatching event: 37 (SIG_MWI) on port -1:-1 Oct 23 09:35:05 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Voice mail for acct 1: 1/0
Qwerty, why would you want to change the ring voltage?
About the codecs, I think G729a is only available outbound (from us to FPL) while inbound it's other codecs that are used.
BTW, MWI still not working here as of today...
-
- *Go-To Guy*
- Posts: 532
- Joined: 08/06/2010
- SIP Device Name: Grandstream HT-502
- Firmware Version: 1.0.1.63
- ISP Name: DSL TekSavvy
- Computer OS: OSX Snow Leopard
- Router: Linksys WRT54GL w/tomato
Re: Oct 6, 2010 Upgrade-Related Bugs
Wow, the CLI manual for your modemd clocks in at 946 pages. Not for the faint of the heart.
In any case, technically, adjusting ring voltage should only have an effect on ringing. The reason for that is that not all countries share the same ring electrical specifications, so I assume this parameter is there to ensure all your proper analog equipment, even if they're 70 years old, will still ring properly.
Do you have the noise when you call your voicemail too?
In any case, technically, adjusting ring voltage should only have an effect on ringing. The reason for that is that not all countries share the same ring electrical specifications, so I assume this parameter is there to ensure all your proper analog equipment, even if they're 70 years old, will still ring properly.
Do you have the noise when you call your voicemail too?
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: Oct 6, 2010 Upgrade-Related Bugs
technically I get a slight sounds of snow per call, But nothing to worry that much about since the caller can not hear it. I even get echos once in awile or the caller tells me it echos and this is not in anyway the settings or the voip provider related...I have tested this so I know...when you hear a slight sound it can be caused by the old age of our wiring and how far the wiring from our home jacks is to the server and so forth.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: Nimbuzz is not working
See what happens on a rainy weekend?!ogammo wrote:who wants your null knowledge to fix any problem.
go play with your toys
dutty.persian, and anyone else having these issues below, please email support@freephoneline.ca (or PM myself and FPL-Steve here); support@freephoneline.ca may surprisingly be the best option so we can consolidate all our bugs related to these topics in a nice list:
Voicemail to email settings not saving (Copy, Forward, None)
Voicemail password not saving (Local & remote access)
Voicemail greeting saving, but not playing
... essentially, anything to do with voicemail except MWI as this is fixed globally now
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
-
- Quiet One
- Posts: 27
- Joined: 10/23/2010
- SIP Device Name: Thomson TG784 & 780
- ISP Name: Fibernetics
- Router: Thomson TG784 & 780
Re: Oct 6, 2010 Upgrade-Related Bugs
Thanks Laurent, yes I do have the same noise when I call voicemail. In fact I hear it even during dial tone... My home is a recent built and I wired my telephone myself with shielded CAT5E for telephone and CAT6 for networking (both as a star network). Cable length or age of cable is not a factor. Both my videotron phone modem and may FPL VOIP modem are located in the basement so the setup (cable length, jack, etc...) is the same during my tests. Clear line Videotron, faint buzzing on FPL. Everything else is perfect, I am sure the solution is hidden in the settings.laurent wrote:Wow, the CLI manual for your modemd clocks in at 946 pages. Not for the faint of the heart.
In any case, technically, adjusting ring voltage should only have an effect on ringing. The reason for that is that not all countries share the same ring electrical specifications, so I assume this parameter is there to ensure all your proper analog equipment, even if they're 70 years old, will still ring properly.
Do you have the noise when you call your voicemail too?
local CALLS Not covered by traff plan...Message
I'm Getting the message "this call is not covered by our traff plan". Can not make any local calls. Can not access voice mail. I hope they can fix this one fast!!
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: local CALLS Not covered by traff plan...Message
For this issue, please see http://forum.freephoneline.ca/viewtopic.php?f=8&t=1855 as it is unrelated to our upgrade.UD3046 wrote:I'm Getting the message "this call is not covered by our traff plan". Can not make any local calls. Can not access voice mail. I hope they can fix this one fast!!
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: Nimbuzz is not working
When calling new Toronto remote access number (14164770355) I always get "that account number does not exist".admin wrote: Voicemail password not saving (Local & remote access)
... essentially, anything to do with voicemail except MWI as this is fixed globally now
I've tried both 1-416-477-XXXX and 416-477-XXXX.
What is my account number?
- FONGO_steve
- Site Moderator
- Posts: 2131
- Joined: 07/16/2009
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
- Location: Cambridge
Re: Nimbuzz is not working
Your account number would be your phone number with a 1 in front.zombie999 wrote:When calling new Toronto remote access number (14164770355) I always get "that account number does not exist".admin wrote: Voicemail password not saving (Local & remote access)
... essentially, anything to do with voicemail except MWI as this is fixed globally now
I've tried both 1-416-477-XXXX and 416-477-XXXX.
What is my account number?
Can you PM me your number and your voicemail password? Feel free to set a temporary password for me if you don't want to disclose your primary one. I'd like to test and take a look here since my account seems to work fine.
Steve
Fongo
Development Support Specialist.
Fongo
Development Support Specialist.
Re: Nimbuzz is not working
Thanks Steve. PM sent.FPL-steve wrote:Your account number would be your phone number with a 1 in front.zombie999 wrote:When calling new Toronto remote access number (14164770355) I always get "that account number does not exist".admin wrote: Voicemail password not saving (Local & remote access)
... essentially, anything to do with voicemail except MWI as this is fixed globally now
I've tried both 1-416-477-XXXX and 416-477-XXXX.
What is my account number?
Can you PM me your number and your voicemail password? Feel free to set a temporary password for me if you don't want to disclose your primary one. I'd like to test and take a look here since my account seems to work fine.
Now it acts differently though. It accepts my account number but says the password is invalid.