Is Free PhoneLine Down? Dec 21, 2012

[cgitej]

Trying to make some calls, none of the numbers I'm dialing is going through; tried resetting sip device, router and cable modem, any thoughts?

[jobushema]

Yes I am having the same problem. I though it was my router.Since you are experience the same problem, it may be a system problem

[Jake]

http://forum.fongo.com/viewtopic.php?f=4&t=7286

There is problems right now.

[skyskysky]

All my lines are down, my connection to sip.fongo.com dropped completely a few times tonight at 4:46, 9:57, and since 10:36pm EST it's completely down

[crusader9]

Completely down here too. 11:23PM EST Dec-21

[molsonbubba]

I can call a Rogers wireless # from 905 to 416 area code but same # cannot call me back at 905 area code. Caller gets a busy signal and then call goes to my voice mail.
If I try to call freephonelince.ca registered # in 905 area code I get no ring tone but call does go to that #'s vmail.

Since 3-4 days ago my voice mail indicator on my Panasonic Dect 6 phone no longer works. I cannot see on the phone that I have a vmail waiting. If I pick up the phone I do hear short beeps indicating I have a vmail. Access to vmail works fine.

Fongo/Freephoneline, what is going on with the service?

[crusader9]

I can make calls but can't receive calls (caller gets a busy signal - no ringing or VM).

[zirox]

Big problem here in Montreal! Phone rings, people hear my voice clearly , but I don't hear their voices! My settings are all ok, line is registered.

[thjysj]

by crusader9 » 12/22/2012

I can make calls but can't receive calls (caller gets a busy signal - no ringing or VM).

Same thing happened to me. I am in Guelph, ON.

[awan]

here is the work around I figured

http://forum.fongo.com/viewtopic.php?f=8&t=7334

[cyber062]

+ 1
Register Failed: 501 Not Implemented (server=208.65.240.165:5061; retry in 19s) or Register Failed: 404 No Response From Server (server=208.65.240.165:5061; retry in 36s)


My device is

Obi110 fw 1.3.0 (Build: 2744)

LocalTimeZone= GMT -5:00
DigitMap= (*123|*xx|*98|211|<311:5148720311>|<411:18005551212>|<511:18883550511>|611|<811:18003613977>|911S0|[2-9]xxxxxx|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|[6-7]x*xxxxxxxxxxx.|1xxxxxxxxxx|<1514>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)

ProxyServer= voip.freephoneline.ca
ProxyServerPort= 5061
ProxyServerTransport= UDP
RegistrarServer= voip.freephoneline.ca
RegistrarServerPort= 5061
UserAgentDomain= voip.freephoneline.ca
OutboundProxy= voip.freephoneline.ca
OutboundProxyPort= 5061

X_KeepAliveServerPort=5061
X_UserAgentPort=5061
AuthUserName= 1514XXXXXXX
AuthPassword=XXXXXXXXX


RingFrequency= 52
RingVoltage= 90


PrimaryLine= Trunk Group 1

---------------------------------------------------------------------------------------------------------------


What wong with my setup ?

[awan]

Try using port 5060 or port 5062/5063

[cyber062]

Try using port 5060 or port 5062/5063

Register Failed: 480 Temporarily Unavailable (server=208.65.240.165:5060; retry in 25s)

[awan]

nothing wrong, open the ports on your router using port range forwarding

5060-6061
13000 - 13001

I have setup port triggering after the recent downtime and now my device is working

[manual scan]

Is Free PhoneLine Down? Dec 29, 2012. Montreal area. Registered but no outgoing calls. No voicemail. No services.
FREE my posterior.
Can't rely on Fibernetics. So why would I get their Internet services? If this is the best they can do.

Must be on vacation again!

[cyber062]

Back to normal with 5060 ...