![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
![Confused :?](./images/smilies/icon_e_confused.gif)
Does anyone has the same problem?
OBI110
voip.freephoneline.ca
Port 5060
Tried but less than 10 mins as you suggested. But Google Voice and VOIP.ms working perfectly so it is not ATA or router fault. Also, second number from FPL, been mostly working whenever I test with GroundWire on iPhone4s and on Nexus 4.dibsmft wrote:Try powering off both the router and the ATA , wait for 10 minutes and then restart the router followed by the ATA once the router has connected.
Goodle voice does no use SIP and Voip.ms provides more help in getting around NAT. IF you run other voip on the ATA or through the router you may get plenty of problems unless you have the modem and ATA correctly configured. You should turn off the DHCP on the ATA and give it a fixed IP address and put in the DNS servers etc. manually (the router manual should tell you how to do this). Forward a port (UDP) for SIP signaling ... say 5061 (do not forward 5060) and some RTP ports (also UDP for voice) ..say 8000 - 8010 and enter these into the ATA (Use the ports recommended by Fongo if you wish). Each line on the ATA should have different ports assigned eg. Line 2 5062 UDP and 8011 - 8020. After configuring reboot the router and ATA.vdemko wrote:Tried but less than 10 mins as you suggested. But Google Voice and VOIP.ms working perfectly so it is not ATA or router fault. Also, second number from FPL, been mostly working whenever I test with GroundWire on iPhone4s and on Nexus 4.dibsmft wrote:Try powering off both the router and the ATA , wait for 10 minutes and then restart the router followed by the ATA once the router has connected.