D-Link DPH-540 WiFi phone not working.

[marginal]

Hello.

I am trying to run a D-Link DPH-540 phone with my Freephoneline account.
Dialing is OK but after the other person picks up the phone I hear three short beeps and no one hears a voice.

Please help .

[Mango]

To see if you are affected by FPL's NAT problem, try to temporarily use voip3.freephoneline.ca.

Once your testing is complete, switch back to your original server, and do not continue to use voip3.

If that solved the problem, it indicates your device is configured correctly. In that case, you should:

Open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852

[marginal]

To see if you are affected by FPL's NAT problem, try to temporarily use voip3.freephoneline.ca.

Once your testing is complete, switch back to your original server, and do not continue to use voip3.

If that solved the problem, it indicates your device is configured correctly. In that case, you should:

Open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852

Thank you Mango but it didn't work.

Same thing happens.
After the three short beeps the Wi-Fi phone hangs up by itself.
Here's a screen shot of its SIP configuration.

Thanks.

[marginal]

Wireless Network Status:

ESSID: XXXXXXXXXXX

BSSID: XXXXXXXXXXXXXXX

IP address: 192.168.X.XX

MAC address: XXXXXXXXXXXXXX

WL Info:

rssi is -51

noise is -98

No scan in progress.

current mac channel 6

target channel 6

Receive: good 908, bad 0

Transmit: good 2214, bad 0

RTP Stats:

igrRtpPkt:0

igrRtpByte:0

egrRtpPkt:0

egrRtpByte:0

egrRtpCumLostPkt:0

egrRtpDiscardPkt:0

igrRtpNoProfDiscPkt:0

igrRtcpPkt:0

egrRtcpPkt:0

egrRtpJitter:0

igrRtpLatency:0

PVE Stats:

peakHoldingTime:0

packetCount:0

addTailCount:0

reorderCount:0

overrunCount:0

duplicateCount:0

outOfRangeCount:0

tooLateCount:0

cantDecodeCount:0

ajcUnderrunCount:0

ajcDeleteCount:0

ajcRepeatCount:0

ajcResyncCount:0

ajcPhaseJitterCount:0

inactiveFrameCount:0

activeFrameCount:0

sidFrameCount:0

toneRelayCount:0
PVE State:

timer:0

expectedTimestamp:0

lastArrivalTime:0

lastArrTimeStamp:0

lastReleaseTimestamp:0

actualHoldTime:0

currentHoldTime:0

minHoldTimeTracker:0

maxHoldTimeTracker:0

releaseBump:0

underrunDuration:0

actionPendingTimer:0

currentDec:0

timerLastArrival:0

currentEnc:0

currentEncPktTime:0

currentEncPktSize:0

Thanks.