Phone still not working
-
- Just Passing Thru
- Posts: 6
- Joined: 04/27/2013
Phone still not working
When I dial out I get a message saying "that password is not valid" Also all incoming calls are going straight to voicemail. I have tried the trick of changing the server to voip2.freephonline.com but that does not work. Also unplugged the ATA for 30 min with no change. Please help!
-
- Just Passing Thru
- Posts: 4
- Joined: 01/22/2014
- SIP Device Name: Grandstream HT-701
- Firmware Version: 1.0.4.14
- ISP Name: Rogers
- Computer OS: Windows
- Router: SMC
Re: Phone still not working
bigfatalleycat wrote:When I dial out I get a message saying "that password is not valid" Also all incoming calls are going straight to voicemail. I have tried the trick of changing the server to voip2.freephonline.com but that does not work. Also unplugged the ATA for 30 min with no change. Please help!
I have the same issue, Is there a way to correct it?
Re: Phone still not working
I met the same problem. Anyone could provide some directions to solve it? Thanks a lot in advance.bigfatalleycat wrote:When I dial out I get a message saying "that password is not valid" Also all incoming calls are going straight to voicemail. I have tried the trick of changing the server to voip2.freephonline.com but that does not work. Also unplugged the ATA for 30 min with no change. Please help!
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: Phone still not working
I'm not sure if both of you have already got the help needed with this issue but I will still try and help you here anyways, usually what this means is your password that you previously entered into your ATA device is not correct. Manually type the password into your ATA device (the password is inside your Freephoneline admin interface sip settings) after adding this password just apply/save new settings then (reboot) your ATA and this should solve the password problem.
Let me know if this works plz!
Let me know if this works plz!