No In-coimg Calls FLP-Altima Telecom ZTE H268A
Posted: 08/09/2020
I am new here and would like to share my experience with a recent ISP change to Altima Telecom in Toronto ON.
After internet is installed, my FLP SPA122 started to not ring and go directly to VM. The SPA122 is set to NAT - DHCP, called Altima Telecom, They were not able / willing to help as I am not their VOIP customer. The only they provided was to look into Port Forward to SPA122.
Port Forward is also new to me and ZTE H268A Port forward page is not user friendly. Help on the page is next to nothing and useless.
Then, found a you tube video about disabling SIP ALG, that did not help either. So I disabled all ALGs in ZTE H268A and FLP start to ring when dialed-in.
FTP ALG = Off
H323 ALG = Off
PPTP ALG = Off
RTSP ALG = Off
SIP ALG = Off
TFTP ALG= Off
I hope this would help as there is nothing I was able to find a simple way to get my FLP phone working.
Thank you,
After internet is installed, my FLP SPA122 started to not ring and go directly to VM. The SPA122 is set to NAT - DHCP, called Altima Telecom, They were not able / willing to help as I am not their VOIP customer. The only they provided was to look into Port Forward to SPA122.
Port Forward is also new to me and ZTE H268A Port forward page is not user friendly. Help on the page is next to nothing and useless.
Then, found a you tube video about disabling SIP ALG, that did not help either. So I disabled all ALGs in ZTE H268A and FLP start to ring when dialed-in.
FTP ALG = Off
H323 ALG = Off
PPTP ALG = Off
RTSP ALG = Off
SIP ALG = Off
TFTP ALG= Off
I hope this would help as there is nothing I was able to find a simple way to get my FLP phone working.
Thank you,