403 username mismatch

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo

403 username mismatch

Postby cwhaines » 04/11/2021

Changing to voip2 briefly resolved my calls going to voicemail issue, now I am getting Register Failed: 403 Username mismatch. Any suggestions
cwhaines
One Hit Wonder
 
Posts: 1
Joined: 04/11/2021
SIP Device Name: OBIHai 202
Firmware Version: ?
ISP Name: Bell Fibe
Computer OS: Windows 10
Router: RT-AC1750_B1

Re: username mismatch

Postby Liptonbrisk » 04/11/2021

The incoming call issue with voip.freephoneline.ca was resolved after 4 p.m. EST on April 11th and did not require changing servers after that time.

SIP error 403 means forbidden: the server understood the request but is refusing it. Wrong Authusername or AuthPassword are common causes.
Another potential cause might include the ATA attempting to repeatedly register within a short interval resulting in a temporary IP ban.

Refer to page 25 and 28 of this guide: download/file.php?id=2142. If you haven't used that guide already to configure your ATA properly, I suggest reading through it.

Under SIP Credentials, your AuthUserName is your Freephoneline SIP Username, which is found after logging into your account at https://www.freephoneline.ca/showSipSettings. Enter your SIP Username.

Your AuthPassword is your Freephoneline SIP Password, which is found found after logging into your account at https://www.freephoneline.ca/showSipSettings. Enter your SIP Password.

Double check for typos (especially empty spaces), and check if you have a password manager (or form filler) autofilling information that shouldn't be filled in those fields.
Don't copy and paste the username and password. Type them in manually to avoid pasting incorrect values or empty spaces, especially after the password ends.
Copying and pasting empty blank spaces is a common problem.

Also, refer to http://forum.fongo.com/viewtopic.php?f= ... 894#p76894

If the issue is a temporary IP ban, unplugging your ATA for a couple hours can help clear it. However, if your ATA is not configured properly for Freephoneline (incorrect timers), the problem will reoccur.
Note that only one registration per FPL account is allowed at any time. When there are multiple devices/softphones using the same account, only the most recent registration is valid. The previous device will lose registration and incoming calls will not work on it. Multiple registration attempts (which is triggered after rebooting the ATA), exacerbated by using multiple devices, within a short period can lead to a temporary IP ban.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2763
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others


Return to Community Support

Who is online

Users browsing this forum: No registered users and 29 guests