HT802 Port1 calling out only without calling in rings
Posted: 08/08/2021
Hi Friends,
I recently installed a FPL with HT802 phone adapter. HT802 has two phone ports. Firmware is 1.0.27.2. I plan to use one port for home phone and another port for home alarm.
Now port 2 has full function for regular phone with clear voice quality. However, port 1 has a problem. We can call out only without any problem. However, there is no call-in ring.
In order to examine whether there is a hardware or configure issue on port 1, I set port 2 with 'NO Live' to eliminate port 2's influence. Now port 1 can call in and call out.
My question is how to set two ports so that both ports can properly function.
Thanks
Feng.HT802
I recently installed a FPL with HT802 phone adapter. HT802 has two phone ports. Firmware is 1.0.27.2. I plan to use one port for home phone and another port for home alarm.
Now port 2 has full function for regular phone with clear voice quality. However, port 1 has a problem. We can call out only without any problem. However, there is no call-in ring.
In order to examine whether there is a hardware or configure issue on port 1, I set port 2 with 'NO Live' to eliminate port 2's influence. Now port 1 can call in and call out.
My question is how to set two ports so that both ports can properly function.
Thanks
Feng.HT802