Freephoneline registration failure
Posted: 01/17/2022
Hi,
Every so often whenever there is some sort of power failure or ISP service issue, my ATA would have issue registering with FPL sip server. This does not happen 100% whenever there is internet trouble but I would see it approximately every 6 months or so (but this is really random). The occurrence is not a lot but I should not be seeing this issue since this is only happening at my parent's home. My setup with FPL is working 100% without any glitch whether power outage, service failure or self restarting of my router/ATA.
My parent's is on DSL 25/5 with a small ISP using their router/modem which I have enabled as a bridge (bypassing the routing capability) and going into my Asus router. Then all the LAN devices are plugged into the Asus which includes the Linksys ATA.
I configured the ATA to register to one server voip. When the issue of registering appears, no matter how many times I reboot the ATA or router, it would not register on voip. However, as soon as I changed the server to voip2. I register right away. The next time the registration happens, I then swap the server back to voip and everything is good again.
So I have to switch back and forth between voip and voip2 every so often. Does anyone have any insight on what is happening and if there is any solution other than the manual method I have been doing?
Thanks in advance.
Every so often whenever there is some sort of power failure or ISP service issue, my ATA would have issue registering with FPL sip server. This does not happen 100% whenever there is internet trouble but I would see it approximately every 6 months or so (but this is really random). The occurrence is not a lot but I should not be seeing this issue since this is only happening at my parent's home. My setup with FPL is working 100% without any glitch whether power outage, service failure or self restarting of my router/ATA.
My parent's is on DSL 25/5 with a small ISP using their router/modem which I have enabled as a bridge (bypassing the routing capability) and going into my Asus router. Then all the LAN devices are plugged into the Asus which includes the Linksys ATA.
I configured the ATA to register to one server voip. When the issue of registering appears, no matter how many times I reboot the ATA or router, it would not register on voip. However, as soon as I changed the server to voip2. I register right away. The next time the registration happens, I then swap the server back to voip and everything is good again.
So I have to switch back and forth between voip and voip2 every so often. Does anyone have any insight on what is happening and if there is any solution other than the manual method I have been doing?
Thanks in advance.