No dial tone for freephoneline
No dial tone for freephoneline
I been using this freephoneline over 15 years and have no problem at all until one last Saturday with the big storm and my home power went out for a few hours. After few hours later, the power went back up but my home landline not working at all with no dial tone. I reset my internet modem even I reset my router too but no luck at all. Any idea what is going on?
Re: No dial tone for freephoneline
My immediate thought would be either the power supply or the ATA itself being damaged when the power coming back on.
Do the lights on the ATA suggest everything is OK?
Do the lights on the ATA suggest everything is OK?
-
- Active Poster
- Posts: 50
- Joined: 11/17/2011
- SIP Device Name: Cisco SPA122
- Firmware Version: 1.4.1
- ISP Name: Rogers Cable
- Computer OS: Windows 10
- Location: YYZ
Re: No dial tone for freephoneline
Which ATA did you use? Is it connected directly through your internet modem/router gateway combo or connected through a separate router (while the modem is in bridged mode)?kk18 wrote:I been using this freephoneline over 15 years and have no problem at all until one last Saturday with the big storm and my home power went out for a few hours. After few hours later, the power went back up but my home landline not working at all with no dial tone. I reset my internet modem even I reset my router too but no luck at all. Any idea what is going on?