MWI and VMWI

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo

MWI and VMWI

Postby jenom » 05/15/2023

Are MWI and VMWI supposed to work with FPL?
If the answer is NO, I better turn them of in my configuration.
Thanks!
jenom
Active Poster
 
Posts: 97
Joined: 01/03/2012
Location: Mississauga, Ontario, Canada
SIP Device Name: VDV21
ISP Name: Acanac VDSL
Computer OS: Windows 7 Ultimate
Router: Linksys-EA6900-XWRT-VORTEX

Re: MWI and VMWI

Postby Liptonbrisk » 05/15/2023

The answer is yes, but they’re unsolicited. That is, the ATA should not be subscribing for MWI.
It takes up to 10 minutes for the indicator to appear after a message is left and up to 10 minutes to disappear after all messages are deleted.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: MWI and VMWI

Postby jenom » 05/16/2023

I will give it a try, enable both and see what will happen....to see what my phone does....specially curious to hear the "stutter" tone.
10 minutes is better than have nothing at all.
Thank you for your reply !
jenom
Active Poster
 
Posts: 97
Joined: 01/03/2012
Location: Mississauga, Ontario, Canada
SIP Device Name: VDV21
ISP Name: Acanac VDSL
Computer OS: Windows 7 Ultimate
Router: Linksys-EA6900-XWRT-VORTEX

Re: MWI and VMWI

Postby Liptonbrisk » 05/16/2023

Liptonbrisk wrote:The answer is yes, but they’re unsolicited. That is, the ATA should not be subscribing for either.


So <voicemailSubscribeInterval>86400</voicemailSubscribeInterval> might be a problem for you. I'm not sure. I'm not sure if entering 0 disables voicemailsubscribe. You want to disable it. That setting defines the subscribe interval, but it doesn't tell me whether voicemailsubscribe is enabled. If it's not, I would expect voicemailSubscribeInterval to be ignored. Again, I have no clue because I don't have a manual for your ATA.

The bottom line is you don't subscribe to MWI with Freephoneline. Freephoneline sends unsolicited MWI.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: MWI and VMWI

Postby jenom » 05/16/2023

I have these related setting, I can make the first two lines "false".
86400....if it is in seconds, then =1440 minutes......then=24 hours


<vmwiEnable>true</vmwiEnable>
<vmwiSignalingEnable>true</vmwiSignalingEnable>
<voicemailSubscribeInterval>86400</voicemailSubscribeInterval>
jenom
Active Poster
 
Posts: 97
Joined: 01/03/2012
Location: Mississauga, Ontario, Canada
SIP Device Name: VDV21
ISP Name: Acanac VDSL
Computer OS: Windows 7 Ultimate
Router: Linksys-EA6900-XWRT-VORTEX

Re: MWI and VMWI

Postby Liptonbrisk » 05/16/2023

jenom wrote:I have these related setting, I can make the first two lines "false".
86400....if it is in seconds, then =1440 minutes......then=24 hours


<vmwiEnable>true</vmwiEnable>
<vmwiSignalingEnable>true</vmwiSignalingEnable>


Those shouldn't turn on MWI subscribe.


<voicemailSubscribeInterval>86400</voicemailSubscribeInterval>


That's just the interval. I would expect to see a URI entered for voicemailsubscribe or MWISubscribe, so maybe you're fine.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2764
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others


Return to Community Support

Who is online

Users browsing this forum: No registered users and 25 guests