Outgoing Quality is very bad

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo

Outgoing Quality is very bad

Postby vny » 06/16/2009

I have asked for a solution for this many times and there has been no resolve till now.

The outgoing quality is very bad, I cannot hear the other person at all, but they can hear me.

How can I have this fixed.

Frank :idea:
vny
Just Passing Thru
 
Posts: 2
Joined: 06/16/2009

Re: Outgoing Quality is very bad

Postby Krazie243 » 06/16/2009

It's the router. This problem happens all the time. The number one issue with the service using an adaptor is that you need to have some kind of routing device in order to hook up both a computer and an ATA. But, all routers have firewalls. These firewalls tend to mostly block incoming traffic - meaning that you can't hear them - but the outgoing traffic is not blocked - so they can hear you.

Open these ports depending on what you have:
ATA Line 1: UDP 5060
ATA Line 2: UDP 5061
Softphone: UDP 13000 and UDP 13001
Curtis Smale
Student of Wilfrid Laurier University
Krazie243
Active Poster
 
Posts: 74
Joined: 06/10/2009
Location: 30 Duke St W


Return to Community Support

Who is online

Users browsing this forum: No registered users and 28 guests