Fongo Community Forums

Hi
I have one problem with my config ...
I'm able to make call but when I try to call my number I heard the voice-mail... (The person your try to reach is not available)
so im trying to configure my freepbx

my config was this :
trunk name:2-Fpl_peer
cid option :allow any CID
maxx channel : 1
PEER Details:

host=voip.freephoneline.ca
username=14XXXXXXXXX
fromuser=14XXXXXXXXX
secret=XXXXX
nat=yes
type=peer
dtmfmode=auto
canreinvite=no
context=from-trunk

USER Details:
type=user
fromdomain=voip.freephoneline.ca
fromuser=14XXXXXXXXX
username=14XXXXXXXX
secret=rXXXXXX

Register String:
Phonenumber:SECRET@voip.freephoneline.ca/Phonenumber

Can anyone tell me is config and help me?
and if in Sip Setting you do change like Other sip settings or bind address...

As mentioned in the FPBX forum, change your useragent.

1. As Tbrummell says, change the useragaent (http://www.pbxinaflash.com/community/in ... -pbx.2525/)
2. Increase the Max Channels otherwise you won't be able to do 3way calling or be able to make two outgoing calls at once. I have mine set at 4.
3. Take out everything in USER Details, it is not needed.
4. These are my PEER details that work for me.

username=1613366XXXX
type=friend
trustrpid=yes
sendrpid=yes
secret=PASSWORD
qualify=yes
nat=yes
insecure=port,invite
host=voip.freephoneline.ca
dtmfmode=auto
disallow=all
context=from-pstn
canreinvite=nonat
allow=ulaw&g729

Also remember an inbound route must be made which points to either your extension or ring-group.
Use an extension naming scheme which makes sense to you for both later recalling it, and for adding additional phones or ATAs.