Hi
I have one problem with my config ...
I'm able to make call but when I try to call my number I heard the voice-mail... (The person your try to reach is not available)
so im trying to configure my freepbx
my config was this :
trunk name:2-Fpl_peer
cid option :allow any CID
maxx channel : 1
PEER Details:
host=voip.freephoneline.ca
username=14XXXXXXXXX
fromuser=14XXXXXXXXX
secret=XXXXX
nat=yes
type=peer
dtmfmode=auto
canreinvite=no
context=from-trunk
USER Details:
type=user
fromdomain=voip.freephoneline.ca
fromuser=14XXXXXXXXX
username=14XXXXXXXX
secret=rXXXXXX
Register String:
Phonenumber:SECRET@voip.freephoneline.ca/Phonenumber
Can anyone tell me is config and help me?
and if in Sip Setting you do change like Other sip settings or bind address...
No incoming call Freepbx
-
- Tried and True
- Posts: 330
- Joined: 09/21/2010
- SIP Device Name: PIAF/Mitel/PolyCom/Cisco
- Firmware Version: Asterisk 1.8
- ISP Name: Rogers
- Computer OS: CentOS/Windows2008/Win7/Android
- Router: pfSense/Neoware thin client
- Location: Ottawa
Re: No incoming call Freepbx
As mentioned in the FPBX forum, change your useragent.
Re: No incoming call Freepbx
1. As Tbrummell says, change the useragaent (http://www.pbxinaflash.com/community/in ... -pbx.2525/)
2. Increase the Max Channels otherwise you won't be able to do 3way calling or be able to make two outgoing calls at once. I have mine set at 4.
3. Take out everything in USER Details, it is not needed.
4. These are my PEER details that work for me.
username=1613366XXXX
type=friend
trustrpid=yes
sendrpid=yes
secret=PASSWORD
qualify=yes
nat=yes
insecure=port,invite
host=voip.freephoneline.ca
dtmfmode=auto
disallow=all
context=from-pstn
canreinvite=nonat
allow=ulaw&g729
2. Increase the Max Channels otherwise you won't be able to do 3way calling or be able to make two outgoing calls at once. I have mine set at 4.
3. Take out everything in USER Details, it is not needed.
4. These are my PEER details that work for me.
username=1613366XXXX
type=friend
trustrpid=yes
sendrpid=yes
secret=PASSWORD
qualify=yes
nat=yes
insecure=port,invite
host=voip.freephoneline.ca
dtmfmode=auto
disallow=all
context=from-pstn
canreinvite=nonat
allow=ulaw&g729
- Bloodsong
- Tried and True
- Posts: 362
- Joined: 09/18/2009
- SIP Device Name: Zoiper| Grandstream GXP2000
- ISP Name: Tek Savvy Internet (DSL)
- Computer OS: CentOS, Arch, Widows 7, AIX, AS/400
- Router: Cisco ASA 5520
- Smartphone Model: Samsung Galaxy Ace Q
- Android Version: 2.3.6
- Location: Simcoe County
- Contact:
Re: No incoming call Freepbx
Also remember an inbound route must be made which points to either your extension or ring-group.
Use an extension naming scheme which makes sense to you for both later recalling it, and for adding additional phones or ATAs.
Use an extension naming scheme which makes sense to you for both later recalling it, and for adding additional phones or ATAs.