configuring Grandstream HT 286

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo

configuring Grandstream HT 286

Postby pitloops » 06/13/2012

Hi,

FOr IP address, The voice after *** says "e101e102e103e", which brings me nowhere online.
I've also tried "101e102e103e" which it also sometimes says, and no results.

My ATA is setup after the router, and the phone plugged in from there. Is this correct? And what are my next steos towards phone working?

-Steve
pitloops
One Hit Wonder
 
Posts: 1
Joined: 06/13/2012
SIP Device Name: HT-286
Computer OS: OSX snow leopard
Router: Belkin wireless G plus MIMO

Re: configuring Grandstream HT 286

Postby FONGO_mike » 06/13/2012

Moving this to the correct section of the forums.
Configurations is only for sharing different configurations of ATA devices.
L3 Escalation Support Specialist
Fibernetics
Please contact me for your FPL DSL issues. For phone issues, please open a support ticket by going here.
Never give out personal information or access to your computer to somebody you don't know, Fongo staff will never ask for your username or password.
User avatar
FONGO_mike
Site Moderator
 
Posts: 1095
Joined: 12/22/2011
Location: Fibernetics Head Office
SIP Device Name: Grandstream 286/TG701
ISP Name: www.worldline.ca
Computer OS: Windows 7/ Windows XP/Windows Vista
Router: TG784. 780, 585, 546.
Smartphone Model: Bold 9900

Re: configuring Grandstream HT 286

Postby dibsmft » 06/13/2012

What you are getting there is the MAC address and what you want is the IP address.
You need *** and the 02 and will probably be something like 192.168.1.5
dibsmft
*Go-To Guy*
 
Posts: 651
Joined: 05/11/2011
Location: St. John's NL
SIP Device Name: Yealink T22 (SPA3102 GS286)
Firmware Version: 7.60.0.110
ISP Name: Bell-Aliant DSL
Computer OS: Linux Mint
Router: Speedstream 6520
Smartphone Model: Google Nexus 5
Android Version: 3.2.1

Re: configuring Grandstream HT 286

Postby FONGO_mike » 06/13/2012

dibsmft wrote:What you are getting there is the MAC address and what you want is the IP address.
You need *** and the 02 and will probably be something like 192.168.1.5



With the 286, you can also try just picking up the receiver on the phone and pressing the white button on the ATA (the one that turns red or green) to be able to get the IP read out to you
L3 Escalation Support Specialist
Fibernetics
Please contact me for your FPL DSL issues. For phone issues, please open a support ticket by going here.
Never give out personal information or access to your computer to somebody you don't know, Fongo staff will never ask for your username or password.
User avatar
FONGO_mike
Site Moderator
 
Posts: 1095
Joined: 12/22/2011
Location: Fibernetics Head Office
SIP Device Name: Grandstream 286/TG701
ISP Name: www.worldline.ca
Computer OS: Windows 7/ Windows XP/Windows Vista
Router: TG784. 780, 585, 546.
Smartphone Model: Bold 9900

Re: configuring Grandstream HT 286

Postby cu2o2o2 » 06/13/2012

I noticed that you have a Belkin router. You might want to consider reading the following link:

http://help.activepbx.com/KB/a41/router-compatibility-list.aspx#incompatible

I know it is not FPL saying so you may want to take it with a grain of salt. I know that bridonca abhors Belkin routers for VOIP.
.

You agree to read my posts at your own risk.
cu2o2o2
Lightly Seasoned
 
Posts: 227
Joined: 04/06/2010
Location: Brampton, ON
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1


Return to Community Support

Who is online

Users browsing this forum: No registered users and 38 guests