Fongo Community Forums

Trying to make some calls, none of the numbers I'm dialing is going through; tried resetting sip device, router and cable modem, any thoughts?

Yes I am having the same problem. I though it was my router.Since you are experience the same problem, it may be a system problem

http://forum.fongo.com/viewtopic.php?f=4&t=7286

There is problems right now.

All my lines are down, my connection to sip.fongo.com dropped completely a few times tonight at 4:46, 9:57, and since 10:36pm EST it's completely down

Completely down here too. 11:23PM EST Dec-21

I can call a Rogers wireless # from 905 to 416 area code but same # cannot call me back at 905 area code. Caller gets a busy signal and then call goes to my voice mail.
If I try to call freephonelince.ca registered # in 905 area code I get no ring tone but call does go to that #'s vmail.

Since 3-4 days ago my voice mail indicator on my Panasonic Dect 6 phone no longer works. I cannot see on the phone that I have a vmail waiting. If I pick up the phone I do hear short beeps indicating I have a vmail. Access to vmail works fine.

Fongo/Freephoneline, what is going on with the service?

I can make calls but can't receive calls (caller gets a busy signal - no ringing or VM).

Big problem here in Montreal! Phone rings, people hear my voice clearly , but I don't hear their voices! My settings are all ok, line is registered.

by crusader9 » 12/22/2012

I can make calls but can't receive calls (caller gets a busy signal - no ringing or VM).

Same thing happened to me. I am in Guelph, ON.

here is the work around I figured

http://forum.fongo.com/viewtopic.php?f=8&t=7334

+ 1
Register Failed: 501 Not Implemented (server=208.65.240.165:5061; retry in 19s) or Register Failed: 404 No Response From Server (server=208.65.240.165:5061; retry in 36s)


My device is

Obi110 fw 1.3.0 (Build: 2744)

LocalTimeZone= GMT -5:00
DigitMap= (*123|*xx|*98|211|<311:5148720311>|<411:18005551212>|<511:18883550511>|611|<811:18003613977>|911S0|[2-9]xxxxxx|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|[6-7]x*xxxxxxxxxxx.|1xxxxxxxxxx|<1514>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)

ProxyServer= voip.freephoneline.ca
ProxyServerPort= 5061
ProxyServerTransport= UDP
RegistrarServer= voip.freephoneline.ca
RegistrarServerPort= 5061
UserAgentDomain= voip.freephoneline.ca
OutboundProxy= voip.freephoneline.ca
OutboundProxyPort= 5061

X_KeepAliveServerPort=5061
X_UserAgentPort=5061
AuthUserName= 1514XXXXXXX
AuthPassword=XXXXXXXXX


RingFrequency= 52
RingVoltage= 90


PrimaryLine= Trunk Group 1

---------------------------------------------------------------------------------------------------------------


What wong with my setup ?

Try using port 5060 or port 5062/5063

awan wrote:Try using port 5060 or port 5062/5063

Register Failed: 480 Temporarily Unavailable (server=208.65.240.165:5060; retry in 25s)

nothing wrong, open the ports on your router using port range forwarding

5060-6061
13000 - 13001

I have setup port triggering after the recent downtime and now my device is working

Is Free PhoneLine Down? Dec 29, 2012. Montreal area. Registered but no outgoing calls. No voicemail. No services.
FREE my posterior.
Can't rely on Fibernetics. So why would I get their Internet services? If this is the best they can do.

Must be on vacation again!

Back to normal with 5060 ...