flomar wrote:Funkytown,
Now is ok in another hour is not ok, in the morning I had a 2-3 sec a power cut and then only vbuzzer worked then, when I came for lunch both were working fine, then when I came back a while ago both line were not working then, after restart the ata both line are working again. So smth is not in order I don't know with ata or router. Same was happening when I had only one line, once in a while I had to restart the ata to have vbuzzer line working, I thing I have to dig deep to find which one is faulty or what the issue is, I wish to say that I studied the manual, but what ever i did I was not able to get in my ata.Each time when I tried to login on Lan port I got the page with "internet explorer cannot display....", no matter I used the ip given buy router or by ***02 on phone.
Funkytown wrote:Rogers Cable>Voip ATA [GrandStream]>Wireless Router? This would work best!
flomar wrote:Also they did their statement with third part policy:
"If you are having any further issues, keep in mind we do not
support third party ATAs. Please contact the manufacturer of the ATA."
flomar wrote:I was able to connect a pc to Lan port of ata typed in browser 192.168.97.1 the ip gave in ipconfig/renew cmd window.
laurent wrote:Both parties?? How can you NOT be on FPL on your end?
As for me, everyone I call is on standard Bell phone lines and there's no static.
laurent wrote:Tried a different phone for fun?
By the way I have a problem with my HT502 that is making me go nuts.
Every few days, I pick up the phone and .. "Device not registered."
I then log on the webpage, click any tab, press reboot, voila. I'm goot for a few days, maybe even a week. What the heck? I've checked the settings over and over again, the registration expiration is currently set at 60 minutes, with a retry set to 30 seconds.
Any ideas? I'm about to eBay me a PAP2T.
laurent wrote:
And about your hang up problem, check these two settings: "Hook Flash Timing" and "On Hook Timing" These adjust how long the on-hook has to last to detect various functions (like flash or hangup). Try reducing them maybe.
Return to Device Configuration Sharing
Users browsing this forum: No registered users and 4 guests