wind wrote:Hi here,
My phone is hard receive a call,sometime is ok, sometime not, I try to use the blew dial plan, but it does not making better,
{911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|*98|[6-7]x*xxxxxxxxxxx.}
please give me some advice,
Thanks
flomar wrote:Hey, Funkytown,
A while ago I applied for a second phone no. from freephoneline.
For the first one I paid $ 50, so it was working through ata Grandstream 502 device like a regular home phone. All was ok; but today after I applied for second no. and if the login in the software is set to the second no. the first one is not ringing anymore on my home phone but instead is ringing the software from my pc.
I f I don't pick up indeed I got the voice mail for it but it never rings in my home and I have tone to it.
So can you tell me how can it be setup to work properly each no, the first one as home no like it was and the second one my pc.If I use the second no details log in on other internet connection all is ok,can you help? I know that you are the best if you cannot
Thanks,
manual scan wrote:Sent configuration via PM with no response or acknowledgement of receipt.
This is a Phantom outfit pretending to be in Ontario when in reality they are working out of Singapore.
xaueious wrote:Disabling LEC is a bad idea. You end up with far-end ECHO because you just killed the echo cancellation.
I wish I saw this thread earlier and avoided the HT-502 o_O. I also have registration loss problems. But I realized that my settings were different than those recommended by Fongo for Grandstream devices. I'll try again and monitor the situation.
Specifically, my logs tell me that I am getting SIP message 403 back from the server on REGISTER, which means that my ATA is somehow sending bad credentials. I haven't touched the credentials in my ATA from what was working, so something is going on here which should be fixable.
Is there someone we can contact for access to the server logs? I have syslog running, so I have a timestamp and an IP for this.
I'd imagine that most of Grandstream's products are varying implementations of Lantiq SoC. They can't be that different to have 2 ATAs running so well and others -_- ...
tbrummell wrote:SIP is not blocked by Rogers, at least not on my node.
unibroue wrote:
is it blocked with videotron?
Stoein wrote:Hi
Ported my number Today
I am able to call out.
But when dialing in it says the account is not active.
Is it just a matter of time before it changes over.
Thank you
Stoein wrote:Hi
I have some calls coming in from Sip scanners.
Does anyone have any suggestion on how to get rid of them.
thanks
firmware.grandstream.com/BETA
Return to Device Configuration Sharing
Users browsing this forum: No registered users and 3 guests