No incoming call Freepbx

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo

No incoming call Freepbx

Postby simsim346 » 04/05/2012

Hi
I have one problem with my config ...
I'm able to make call but when I try to call my number I heard the voice-mail... (The person your try to reach is not available)
so im trying to configure my freepbx

my config was this :
trunk name:2-Fpl_peer
cid option :allow any CID
maxx channel : 1
PEER Details:

host=voip.freephoneline.ca
username=14XXXXXXXXX
fromuser=14XXXXXXXXX
secret=XXXXX
nat=yes
type=peer
dtmfmode=auto
canreinvite=no
context=from-trunk

USER Details:
type=user
fromdomain=voip.freephoneline.ca
fromuser=14XXXXXXXXX
username=14XXXXXXXX
secret=rXXXXXX

Register String:
Phonenumber:SECRET@voip.freephoneline.ca/Phonenumber

Can anyone tell me is config and help me?
and if in Sip Setting you do change like Other sip settings or bind address...
simsim346
One Hit Wonder
 
Posts: 1
Joined: 04/05/2012
SIP Device Name: FREEPBX
ISP Name: cable
Computer OS: linux
Router: dlink

Re: No incoming call Freepbx

Postby tbrummell » 04/08/2012

As mentioned in the FPBX forum, change your useragent.
tbrummell
Tried and True
 
Posts: 330
Joined: 09/21/2010
Location: Ottawa
SIP Device Name: PIAF/Mitel/PolyCom/Cisco
Firmware Version: Asterisk 1.8
ISP Name: Rogers
Computer OS: CentOS/Windows2008/Win7/Android
Router: pfSense/Neoware thin client

Re: No incoming call Freepbx

Postby Jake » 04/08/2012

1. As Tbrummell says, change the useragaent (http://www.pbxinaflash.com/community/in ... -pbx.2525/)
2. Increase the Max Channels otherwise you won't be able to do 3way calling or be able to make two outgoing calls at once. I have mine set at 4.
3. Take out everything in USER Details, it is not needed.
4. These are my PEER details that work for me.

username=1613366XXXX
type=friend
trustrpid=yes
sendrpid=yes
secret=PASSWORD
qualify=yes
nat=yes
insecure=port,invite
host=voip.freephoneline.ca
dtmfmode=auto
disallow=all
context=from-pstn
canreinvite=nonat
allow=ulaw&g729
User avatar
Jake
Technical Support
 
Posts: 2823
Joined: 10/18/2009

Re: No incoming call Freepbx

Postby Bloodsong » 04/12/2012

Also remember an inbound route must be made which points to either your extension or ring-group.
Use an extension naming scheme which makes sense to you for both later recalling it, and for adding additional phones or ATAs.
User avatar
Bloodsong
Tried and True
 
Posts: 362
Joined: 09/18/2009
Location: Simcoe County
SIP Device Name: Zoiper| Grandstream GXP2000
ISP Name: Tek Savvy Internet (DSL)
Computer OS: CentOS, Arch, Widows 7, AIX, AS/400
Router: Cisco ASA 5520
Smartphone Model: Samsung Galaxy Ace Q
Android Version: 2.3.6


Return to Community Support

Who is online

Users browsing this forum: No registered users and 28 guests