GrandStream HT-502
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
GrandStream HT-502
Please Note:
Guides for third-party hardware are provided on an as-is purpose for reference only. We will not provide any direct support for third party hardware, nor can we be held responsible for any mistakes in these guides.
Guides for third-party hardware are provided on an as-is purpose for reference only. We will not provide any direct support for third party hardware, nor can we be held responsible for any mistakes in these guides.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: GrandStream HT-502
Being I just signed up and have this device I tried the settings but does'nt work. Had a problem with the dial plan string {911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*[6-7]x*xxxxxxc}
located in the FSX config page.Is it complete or am I missng something?
Once the ata gets programmed properly will it still work or is there something else that needs to get done?
located in the FSX config page.Is it complete or am I missng something?
Once the ata gets programmed properly will it still work or is there something else that needs to get done?
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
No, it's complete.
I have an HT-502 in the office that I'll configure once more with and without the routing enabled and see if there are any changes in functionality etc...
GrandStream seems to have their own type of dial plans they use though, our recommended dial string may not work with that.
I have an HT-502 in the office that I'll configure once more with and without the routing enabled and see if there are any changes in functionality etc...
GrandStream seems to have their own type of dial plans they use though, our recommended dial string may not work with that.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: GrandStream HT-502
Hello All,
I am using following dial plan from the last 3 months In HT502 with no problems. Note this plan seems missing 911 function so please keep this fact in mind.
{ *98|1xxxxxxxxxx|[2-9]xxxxxxxxx|011xxxxxxxxxxxx|98*|[6-7]x*xxxxxxxxxxx}
I am using following dial plan from the last 3 months In HT502 with no problems. Note this plan seems missing 911 function so please keep this fact in mind.
{ *98|1xxxxxxxxxx|[2-9]xxxxxxxxx|011xxxxxxxxxxxx|98*|[6-7]x*xxxxxxxxxxx}
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
Check out our new dial plan, in the SIP settings of your account on the FPL web.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: GrandStream HT-502
Hi, all:
I just bought a second hand HT-502, it was used with other VOIP provider. Now I want to make it work with FPL.
The problem is it was configured for other VOIP provider, and I don't have administrator password to access its "Advanced Settings" page. Is there a way to reset this HT-502 back to default factory setting?
Thanks!
Regards,
Kevin
I just bought a second hand HT-502, it was used with other VOIP provider. Now I want to make it work with FPL.
The problem is it was configured for other VOIP provider, and I don't have administrator password to access its "Advanced Settings" page. Is there a way to reset this HT-502 back to default factory setting?
Thanks!
Regards,
Kevin
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
I'm not sure. I conveniently have one sitting here so I'll look into it
. If you flash the firmware it should reset it without the password.
I beleive however the password is some version of :
admin / admin
administrator / admin
admin / administrator
Administrator / admin
![Wink ;)](./images/smilies/icon_e_wink.gif)
I beleive however the password is some version of :
admin / admin
administrator / admin
admin / administrator
Administrator / admin
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: GrandStream HT-502
from their manual
Pay attention to the notes at the endRESTORE FACTORY DEFAULT SETTING
WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone.
Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not
take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service
provider.
FACTORY RESET
There are two (2) methods for resetting your unit:
Reset Button
Reset default factory settings following these four (4) steps:
1. Unplug the Ethernet cable.
2. Locate a needle-sized hole on the back panel of the gateway unit next to the power connection.
3. Insert a pin in this hole, and press for about 7 seconds.
4. Take out the pin. All unit settings are restored to factory settings.
IVR Command
Reset default factory settings using the IVR Prompt (Table 5):
1. Dial “***” for voice prompt.
2. Enter “99” and wait for “reset” voice prompt.
3. Enter the encoded MAC address (Look below on how to encode MAC address).
4. Wait 15 seconds and device will automatically reboot and restore factory settings.
Encode the MAC Address
1. Locate the MAC address of the device. It is the 12 digit HEX number on the bottom of the unit.
2. Key in the MAC address. Use the following mapping:
0-9: 0-9
A: 22 (press the “2” key twice, “A” will show on the LCD)
B: 222
C: 2222
D: 33 (press the “3” key twice, “D” will show on the LCD)
E: 333
F: 3333
For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”.
NOTE:
1. Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”.
2. Please be aware by default the HT502 WAN side HTTP access is disabled. After a factory reset, the
device’s web configuration page can be accessed only from its LAN port.
3. If the HT502 was previously locked by your local service provider, pressing the RESET button will only
restart the unit. The device will not return to factory default settings.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
Yes, the device will only be accessable if you plug it into the LAN port on the HT502 and then directly into your computer.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
-
- Just Passing Thru
- Posts: 5
- Joined: 01/29/2010
- SIP Device Name: GrandStream HT-502
- ISP Name: Videotron 30mbps
- Computer OS: windows xp
Re: GrandStream HT-502
I am having problems calling out and receiving calls. as soon as the other person picks up at the other end phone goes fast busy. when someone calls in it goes fast busy as soon as phone is picked up. any suggestions
-
- Just Passing Thru
- Posts: 13
- Joined: 03/08/2010
- SIP Device Name: GRANDSTREAM HT502
- Firmware Version: 1.0.1.57
- Computer OS: XP
GRANDSTREAM HT502 DTMF?
What method for DTMF?
inline audio
sip info
rfc
priority 1,2,3 ?
im using pcmu as a codec, works very well but it uses more bandwidth cause it gets less compressed of course![Smile :)](./images/smilies/icon_e_smile.gif)
inline audio
sip info
rfc
priority 1,2,3 ?
im using pcmu as a codec, works very well but it uses more bandwidth cause it gets less compressed of course
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Just Passing Thru
- Posts: 13
- Joined: 03/08/2010
- SIP Device Name: GRANDSTREAM HT502
- Firmware Version: 1.0.1.57
- Computer OS: XP
GRANDSTREAM HT502 RTP SIZE?
RTP size is 0.020 where do i find this? - if it is higher is it better I was told, then where do i find it with a photo image preferred to show me ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
GrandStream HT-502 Not able to Make call
Hi Admin and other members,
I have received the configuration file and did the set up in my Grandstream HT 502 device. It says Registered OK.
But when I dial a number, in my Handset I do not hear anything and after 4-5 sec I get the call getting disconnected with double continuous beep tone.
How ever on the number I dialed it the phone keeps ringing and ringing. If I receive the call then it has no response from the other side.
I tried to copy the setting provided here.
Please guide.
I have received the configuration file and did the set up in my Grandstream HT 502 device. It says Registered OK.
But when I dial a number, in my Handset I do not hear anything and after 4-5 sec I get the call getting disconnected with double continuous beep tone.
How ever on the number I dialed it the phone keeps ringing and ringing. If I receive the call then it has no response from the other side.
I tried to copy the setting provided here.
Please guide.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
Could you please PM me your Freephoneline number and I'll test it out here
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: GrandStream HT-502
Hi Admin,
Thanks for your response.
The FPL number is 514 447 5***
Thanks for your response.
The FPL number is 514 447 5***
admin wrote:Could you please PM me your Freephoneline number and I'll test it out here
Last edited by FONGO_kris on 03/25/2010, edited 1 time in total.
Reason: Edited for users privacy
Reason: Edited for users privacy
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: GrandStream HT-502
Grand Stream Ht 502
Very Important: Anyone who doesn't have this properly put into the GS 502 as there dial plan will NOT be able to recieve calls nor place calls!
Dial Plan:
Very Important: Anyone who doesn't have this properly put into the GS 502 as there dial plan will NOT be able to recieve calls nor place calls!
Dial Plan:
Code: Select all
{911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|*98|[6-7]x*xxxxxxxxxxx.}
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
If you look under the dial string in your SIP settings, it says:
(please note that this is a Linksys dial string we use for our devices and may not work with third party, non-Linksys/Sipura devices
As for the config, you need to use the default dial plan that comes with it. I have no idea why that was in there... Sorry guys.
(please note that this is a Linksys dial string we use for our devices and may not work with third party, non-Linksys/Sipura devices
As for the config, you need to use the default dial plan that comes with it. I have no idea why that was in there... Sorry guys.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: GrandStream HT-502
DIAL PLAN
YES this works perfectly, I am using right now with your services for over 6 months
ONLY for Clearpointel / Freephoneline
Grand Stream Ht 502
Very Important: Anyone who doesn't have this properly put into the GS 502 as there dial plan will NOT be able to recieve calls nor place calls!
Dial Plan:
YES this works perfectly, I am using right now with your services for over 6 months
ONLY for Clearpointel / Freephoneline
Grand Stream Ht 502
Very Important: Anyone who doesn't have this properly put into the GS 502 as there dial plan will NOT be able to recieve calls nor place calls!
Dial Plan:
Code: Select all
{911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|*98|[6-7]x*xxxxxxxxxxx.}
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: GrandStream HT-502
sorry but 911 is very important to have at homekraza01 wrote:Hello All,
I am using following dial plan from the last 3 months In HT502 with no problems. Note this plan seems missing 911 function so please keep this fact in mind.
{ *98|1xxxxxxxxxx|[2-9]xxxxxxxxx|011xxxxxxxxxxxx|98*|[6-7]x*xxxxxxxxxxx}
Dial Plan:
Code: Select all
{911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|*98|[6-7]x*xxxxxxxxxxx.}
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: GRANDSTREAM HT502 RTP SIZE?
Postmeon wrote:RTP size is 0.020 where do i find this? - if it is higher is it better I was told, then where do i find it with a photo image preferred to show me
on GrandStream this you dont need to change this as its already set by default
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: GRANDSTREAM HT502 DTMF?
Postmeon wrote:What method for DTMF?
inline audio
sip info
rfc
priority 1,2,3 ?
im using pcmu as a codec, works very well but it uses more bandwidth cause it gets less compressed of course
PCMU=G711 (excellent quality) just like a regular phone line but uses much more bandwidth
"sip info" is the primary and should be choosen.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
Yes, it is a difference of 87.2 Kbps and 31.2 Kbps for G711u and G729a.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: GrandStream HT-502
Yup thats about right, also not to metion the reason why G711 codec is so much better in voice quality then the rest of codecs is cause its not compressed to mini-bits like the restadmin wrote:Yes, it is a difference of 87.2 Kbps and 31.2 Kbps for G711u and G729a.
![Smile :)](./images/smilies/icon_e_smile.gif)
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: GrandStream HT-502
Indubitably.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: GrandStream HT-502
Hi Funkytown,
Thanks a lot for sharing the dial plan. In fact the dial plan I received was not working on this SIP device. Kris is very right in saying that their dial plan is not suitable for any other devices.
Well when I could not succeed in setting up my phone with the dial plan I just went to the default setting and without a dial plan. It was working very fine with me before. The only problem was
- I was not able to access my voice mail from my phone and the 911
- I need to wait for 5-10 seconds before it starts ringing on the other side
But with this new dial plan as suggested by you , the phone is working very fine and all three issues mentioned above is eliminated. Thanks a million buddy and also thanks a lot to Kris for his constant support to this forum.
Thanks a lot for sharing the dial plan. In fact the dial plan I received was not working on this SIP device. Kris is very right in saying that their dial plan is not suitable for any other devices.
Well when I could not succeed in setting up my phone with the dial plan I just went to the default setting and without a dial plan. It was working very fine with me before. The only problem was
- I was not able to access my voice mail from my phone and the 911
- I need to wait for 5-10 seconds before it starts ringing on the other side
But with this new dial plan as suggested by you , the phone is working very fine and all three issues mentioned above is eliminated. Thanks a million buddy and also thanks a lot to Kris for his constant support to this forum.