Linksys SPA 2102
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.
1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.
Please stay on topic
Re: Linksys SPA 2102
after doing a number of searches on google i found a post where someone said to enter the folliwng string:
****7932#1#1
this will apparantly allow you to log into when you have a wireless router.
I tired it and it did work.
But now i keyed in all the info from the attachment in this forum and I get a dial tone but when I call any number i get a busy signal.
****7932#1#1
this will apparantly allow you to log into when you have a wireless router.
I tired it and it did work.
But now i keyed in all the info from the attachment in this forum and I get a dial tone but when I call any number i get a busy signal.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: Linksys SPA 2102
Have you opened all the required ports in your router?
UDP: 5060 - 6061, 10,000 - 20,000
Also, are there any foreign characters in your Display Name, ie. &,%,$,# etc...
UDP: 5060 - 6061, 10,000 - 20,000
Also, are there any foreign characters in your Display Name, ie. &,%,$,# etc...
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: Linksys SPA 2102
I have not done anythign with my router.
how would i do that?
how do i see if there are any foreign characters in my display name? i don't recall entering a display name anywhere...
how would i do that?
how do i see if there are any foreign characters in my display name? i don't recall entering a display name anywhere...
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: Linksys SPA 2102
Under Line 1, the subheading "Subscriber Information" there should be:
Display Name: _______________ Username: _______________
Password: _______________
In that order usually.
Display Name: _______________ Username: _______________
Password: _______________
In that order usually.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: Linksys SPA 2102
and i would enter the SIP username and password there?
Re: Linksys SPA 2102
GOT IT.
thank you for all the help!!
thank you for all the help!!
-
- Just Passing Thru
- Posts: 9
- Joined: 05/31/2010
- SIP Device Name: SPA-2102
- Firmware Version: 5.2.10
- ISP Name: Telus-DSL
- Computer OS: Windows 7
Re: Linksys SPA 2102
Tried to put the VOIP box into the DMZ zone this morning, still can't get anything....
Could anyone please help? Thanks!
Could anyone please help? Thanks!
zhuanyi wrote:Just got the configuration file today although the order were only submitted on Thursday, you guys are FAST!!!!!
Everything seems to work, I was able to dial calls and receive calls and phone rings as normal...
ALL BUT ONE!
I can't hear any outgoing voice!!!
I checked the STUN was disabled and my line 1 is connected to iTalkBB, which I still have a contract with and can't mess around, so I basically used line 2 to do all the configuration. However, I checked that restricted domain will only affect Line 1 correct? I actually verified this with the sales before made the purchase...
Where else could it go wrong? My softphone version does not seems to work either, which I did not realise before I made the purchase, is there any firewall port that needs to be opened? I do not recall I need to do anything for iTalkBB though...
Please help, thanks!
- FONGO_steve
- Site Moderator
- Posts: 2131
- Joined: 07/16/2009
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
- Location: Cambridge
Re: Linksys SPA 2102
zhuanyi wrote:Tried to put the VOIP box into the DMZ zone this morning, still can't get anything....
Could anyone please help? Thanks!
zhuanyi wrote:Just got the configuration file today although the order were only submitted on Thursday, you guys are FAST!!!!!
Everything seems to work, I was able to dial calls and receive calls and phone rings as normal...
ALL BUT ONE!
I can't hear any outgoing voice!!!
I checked the STUN was disabled and my line 1 is connected to iTalkBB, which I still have a contract with and can't mess around, so I basically used line 2 to do all the configuration. However, I checked that restricted domain will only affect Line 1 correct? I actually verified this with the sales before made the purchase...
Where else could it go wrong? My softphone version does not seems to work either, which I did not realise before I made the purchase, is there any firewall port that needs to be opened? I do not recall I need to do anything for iTalkBB though...
Please help, thanks!
Out of curiosity, have you tried with the ATA directly on your modem, bypassing the router all together? I know it's in the DMZ, but let's try and keep things as simple as possible for troubleshooting sake.
Steve
Fongo
Development Support Specialist.
Fongo
Development Support Specialist.
-
- Just Passing Thru
- Posts: 9
- Joined: 05/31/2010
- SIP Device Name: SPA-2102
- Firmware Version: 5.2.10
- ISP Name: Telus-DSL
- Computer OS: Windows 7
Re: Linksys SPA 2102
Except the router is in my landlord's room which is off-limit to me (although I have access to the control panel)...
Is there something I should try to ping or do something about?
Is there something I should try to ping or do something about?
FPL-steve wrote:zhuanyi wrote:Tried to put the VOIP box into the DMZ zone this morning, still can't get anything....
Could anyone please help? Thanks!
zhuanyi wrote:Just got the configuration file today although the order were only submitted on Thursday, you guys are FAST!!!!!
Everything seems to work, I was able to dial calls and receive calls and phone rings as normal...
ALL BUT ONE!
I can't hear any outgoing voice!!!
I checked the STUN was disabled and my line 1 is connected to iTalkBB, which I still have a contract with and can't mess around, so I basically used line 2 to do all the configuration. However, I checked that restricted domain will only affect Line 1 correct? I actually verified this with the sales before made the purchase...
Where else could it go wrong? My softphone version does not seems to work either, which I did not realise before I made the purchase, is there any firewall port that needs to be opened? I do not recall I need to do anything for iTalkBB though...
Please help, thanks!
Out of curiosity, have you tried with the ATA directly on your modem, bypassing the router all together? I know it's in the DMZ, but let's try and keep things as simple as possible for troubleshooting sake.
-
- Just Passing Thru
- Posts: 9
- Joined: 05/31/2010
- SIP Device Name: SPA-2102
- Firmware Version: 5.2.10
- ISP Name: Telus-DSL
- Computer OS: Windows 7
Re: Linksys SPA 2102
This is probably the most silly mistake you gonna hear...but I actually don't think I saved the settings in my router to add my VOIP box to DMZ...
Just tried it again, now it works, OH-YAY!!!
Thanks freephoneline.ca guys!
Just tried it again, now it works, OH-YAY!!!
Thanks freephoneline.ca guys!
[/quote]FPL-steve wrote:zhuanyi wrote:Tried to put the VOIP box into the DMZ zone this morning, still can't get anything....
Could anyone please help? Thanks!
zhuanyi wrote:Just got the configuration file today although the order were only submitted on Thursday, you guys are FAST!!!!!
Everything seems to work, I was able to dial calls and receive calls and phone rings as normal...
ALL BUT ONE!
I can't hear any outgoing voice!!!
I checked the STUN was disabled and my line 1 is connected to iTalkBB, which I still have a contract with and can't mess around, so I basically used line 2 to do all the configuration. However, I checked that restricted domain will only affect Line 1 correct? I actually verified this with the sales before made the purchase...
Where else could it go wrong? My softphone version does not seems to work either, which I did not realise before I made the purchase, is there any firewall port that needs to be opened? I do not recall I need to do anything for iTalkBB though...
Please help, thanks!
Out of curiosity, have you tried with the ATA directly on your modem, bypassing the router all together? I know it's in the DMZ, but let's try and keep things as simple as possible for troubleshooting sake.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: Linksys SPA 2102
No problem, always here to either help or enlighten!
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Re: Linksys SPA 2102
My sister is having a problem with her phone system.
anytime someone calls her line they either get a busy signal or it says they are not available.
I am assuming there is some sort of setting that needs to be changed but I have no idea what it would be.
They have no problems calling out.
any ideas?
thanks,
anytime someone calls her line they either get a busy signal or it says they are not available.
I am assuming there is some sort of setting that needs to be changed but I have no idea what it would be.
They have no problems calling out.
any ideas?
thanks,
-
- Active Poster
- Posts: 100
- Joined: 03/20/2010
- SIP Device Name: 2wire 2701HGV-E
- Computer OS: XP Pro
- Location: Hawkesbury Ontario
Re: Linksys SPA 2102
I've noticed when you are logged on in your account (meaning if you log in your FPL account on the internet) or you're using the softphone and it is not out on your computer you get that kind of response when calling into it.
Re: Linksys SPA 2102
Hi,
I know I am on my account, my sister is not that good with this stuff so I am trying to help her out.
It is not for the softphone. I set everything up for her on her comp with her login details and she is able to make calls but I forgot to check if she can receive calls.
I know I am on my account, my sister is not that good with this stuff so I am trying to help her out.
It is not for the softphone. I set everything up for her on her comp with her login details and she is able to make calls but I forgot to check if she can receive calls.
Re: Linksys SPA 2102
I have my Linksys SPA-2101 working well with my SIP configuration, however when I do *98 to check voicemail I get a fast busy.
Using a SIP client on my iPhone (Acrobits Softphone) *98 works fine.
Does anyone know what setting I need to configure to get *98 to work with the SPA-2102?
I'm guessing it has to do with my dial plan which is: (911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.)
Thanks.
Using a SIP client on my iPhone (Acrobits Softphone) *98 works fine.
Does anyone know what setting I need to configure to get *98 to work with the SPA-2102?
I'm guessing it has to do with my dial plan which is: (911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.)
Thanks.
-
- One Hit Wonder
- Posts: 1
- Joined: 08/01/2010
- ISP Name: Teksavvy cable
- Computer OS: PC
- Router: Netgear
Re: Linksys SPA 2102
Hey guys,
I was so lucky to have received the SIP information 10 minutes after I had paid it, on a Friday, and by Monday night my bell phone was transferred and ported, thanks a lot you guys are so good ☺. the sound quality is cristal clear
Just a quick question for you, Steve and Kris, how can I set the ATA (2102) so that the message indicator can stop blinking after I have listened to all messages? Now it blinks for 30 minutes after all the massages have been deleted.
Thanks,
Emil
I was so lucky to have received the SIP information 10 minutes after I had paid it, on a Friday, and by Monday night my bell phone was transferred and ported, thanks a lot you guys are so good ☺. the sound quality is cristal clear
Just a quick question for you, Steve and Kris, how can I set the ATA (2102) so that the message indicator can stop blinking after I have listened to all messages? Now it blinks for 30 minutes after all the massages have been deleted.
Thanks,
Emil
-
- Just Passing Thru
- Posts: 10
- Joined: 09/21/2010
- SIP Device Name: linksys SPA-2102
- Firmware Version: 5.2.5
- ISP Name: Radioactif (DSL)
- Computer OS: Windows XP Pro
- Router: Using the Bell 2wire router
- Location: Montreal, QC
Re: Linksys SPA 2102
I have 2 problems with my SPA2102 one when ever someone calls on my phone my time and date on the device changes too 1/1/2003 12:00 for no reason and I have to set it up again to the proper info or else my phones have the wrong info on them. Second Out of nowhere when ever I call on my house phone, cause everything is setup as a house phone. My # is block for everybody. Before people could see my # but now its block ID and phone #. Can someone help me cause I tried everything and it does work. thanks
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: Linksys SPA 2102
to unblock your number its *31manno81 wrote:but now its block ID and phone #. Can someone help
to block your number its *30
maybe this wont work on your model, but try and let me know
- Funkytown
- Technical Support
- Posts: 460
- Joined: 04/01/2010
- SIP Device Name: Cisco SPA112
- Firmware Version: 1.4.1 (SR5) Oct 14 2
- ISP Name: Cik Telecom
- Computer OS: Windows 10
- Router: Zyxel EMG2926
- Smartphone Model: LG G8 Thinq
- Android Version: Android Q
Re: Linksys SPA 2102
there is a setting in most ATA's to disable thisemo_tr wrote:after I have listened to all messages? Now it blinks for 30 minutes after all the massages have been deleted.
-
- Just Passing Thru
- Posts: 3
- Joined: 05/28/2010
- SIP Device Name: UTstarcom
- Computer OS: vista
Re: Linksys SPA 2102
why is it your 2102 setup pictures are not the same us mine? i have a lot more things to feel in. before you ask. yes my ata is a 2102 linksys.
problems im having:
when i call my freephoneline number its only works 20% off the time. iT JUST RINGS AND RINGS BUT THE PHONE NEVER RINGS(before you ask, my phone is set up correct and its not broken)
It does not also go into voice mail when the phone does ring. please remember i hear it ring out when i place the call but it does not ring back to the other side. can anyone help?
i love freephoneline and been using it for almost 3 years but its time i get this fix and use it as my primary phone and i want to fix this
problems im having:
when i call my freephoneline number its only works 20% off the time. iT JUST RINGS AND RINGS BUT THE PHONE NEVER RINGS(before you ask, my phone is set up correct and its not broken)
It does not also go into voice mail when the phone does ring. please remember i hear it ring out when i place the call but it does not ring back to the other side. can anyone help?
i love freephoneline and been using it for almost 3 years but its time i get this fix and use it as my primary phone and i want to fix this
-
- Just Passing Thru
- Posts: 3
- Joined: 05/28/2010
- SIP Device Name: UTstarcom
- Computer OS: vista
Re: Linksys SPA 2102
can you please show the setting on this great linksys but with the new firmare? the upgrade is 5.2.5 and it looks very different with much more settings on....please help and post it with new pictures. thank you so much.
the firmware you used on this 2102 is very old.
the firmware you used on this 2102 is very old.
-
- Just Passing Thru
- Posts: 10
- Joined: 09/21/2010
- SIP Device Name: linksys SPA-2102
- Firmware Version: 5.2.5
- ISP Name: Radioactif (DSL)
- Computer OS: Windows XP Pro
- Router: Using the Bell 2wire router
- Location: Montreal, QC
Re: Linksys SPA 2102
Why do you say that? The answer you gave me is not for the SPA-2102? I'm gonna try it tonite and thanks for the help if you got it right for me.Funkytown wrote:
to unblock your number its *31
to block your number its *30
maybe this wont work on your model, but try and let me know
-
- One Hit Wonder
- Posts: 1
- Joined: 11/11/2010
- SIP Device Name: Linksys spa2102
- Firmware Version: 5.2.10
Re: Linksys SPA 2102
I have what is probably a dumb question. I received my SIP package today and have a question about the Dial Plan. Should the X's be replaced with my number or is it entered the way it is? (911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.) If so please give example.
Thanks
Thanks
- FONGO_steve
- Site Moderator
- Posts: 2131
- Joined: 07/16/2009
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
- Location: Cambridge
Re: Linksys SPA 2102
The x's should remain how they are.Lou wrote:I have what is probably a dumb question. I received my SIP package today and have a question about the Dial Plan. Should the X's be replaced with my number or is it entered the way it is? (911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.) If so please give example.
Thanks
Steve
Fongo
Development Support Specialist.
Fongo
Development Support Specialist.
- FONGO_kris
- Site Moderator
- Posts: 1937
- Joined: 05/06/2009
- SIP Device Name: Polycom 550 IP Phone
- Firmware Version: 4.2.0.0310
- ISP Name: Rogers Cable
- Computer OS: Ubuntu 11.10
- Router: Cisco E1200-N
- Smartphone Model: Samsung Galaxy S2
- Android Version: 4.0.3
- Location: Cambridge, Ontario, Canada
- Contact:
Re: Linksys SPA 2102
The x's indicate digits, such as with 011xxxxxxxxxxxx. it would allow the dialing of 011, and to expect 12 digits and the '.' is to allow more if needed; 1xxxxxxxxxx is to allow the dialing of 1 and up to 10 digits after, the absence of the period dials the number after a 3 second pause if nothing is entered.
Kris
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2
Logistics & International Purchasing | Fongo
Call us toll-free! 611 from your fongo phone or 1-855-836-3355
Please advise I will no longer be contributing to this forum for the time being. Please feel free to email me.
-----------------------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S2 [GT-I9100] / 3.0.15-I9100XXLPH / Thebyani v3.2