TankCla wrote:I have attached the HT802 config for future users
1. Please indicate where to enter SIP Username and SIP Password. Thanks.
2. Transfer on Conference Hang-up
Has anyone tested to see whether setting "Transfer on Conference Hang-up" to "Yes", actually works properly with Freephoneline?
I don't have a Grandstream ATA to test.
That is, when set to Yes, during a 3-way call, when the FPL Grandstream user hangs up, the call is supposed to continue between the other two parties.
The default setting is no, which means the call just gets completely dropped when the FPL user hangs up.
If that setting doesn't work with FPL (that is, if the call doesn't continue between the the two other parties when FPL caller hangs up), it should just remain at the default, "No",
http://www.grandstream.com/hubfs/Produc ... _guide.pdfTransfer on Conference Hang-up
"If set to "Yes", when the phone hangs up as the conference initiator, the
conference call will be transferred to the other parties so that other parties
will remain in the conference call. Default setting is No"
3. Allow Incoming SIP Messages from SIP Proxy Only
Enabling that should help block SIP scanners/hackers. However, it might prevent Fongo Mobile callers from being able to ring you if you're registered on voip2.freephoneline.ca or voip4.freephoneline.ca:6060
Can someone please test calling from Fongo Mobile to FPL while registered on
voip2.freephoneline.ca for me, please, with "Check SIP User ID for Incoming INVITE" set to "yes"?
If that doesn't work, the setting should probably be left at no--and not "yes".
4. Set Check SIP User ID for Incoming INVITE to Yes
This should help block SIP Scanners and hackers.
5. Outgoing Call without Registration
You can leave that set to "no" if you'd like. At least you'll know if you're not registered more easily.
That is, when your ATA is not registered with FPL, outbound calls won't work.
However, strictly speaking, device registration with FPL is not required for outbound calls. It is required for inbound calls only.
6. Subscribe for MWI should be set to No. Freephoneline sends unsolicited MWI.
I don't have time to go through every single setting, but those are the ones that jumped out at me. A quick, cursory glace suggests the rest of them are fine.
Thank you