Before I head off to deal with AC installation, I don't agree with the part of the A.I. assessment that appears to be ignoring that the outbound INVITE goes to voip.freephoneline.ca, while the trunk identity was referencing voip2.freephoneline.ca. "Porta [the switch/server vendor] recommended to Fibernetics [CLEC/network used by Fongo/Freephoneline] to enable Host Name Verification on Sip Registrations. This was enabled." -- Fongo admin
The trunk must present the same host name the provider expects in the SIP registration and related identity fields. That makes the voip vs. voip2 distinction matter, because a host-name mismatch might break call acceptance even when the account page shows connected (however, I haven't tested that).
Related thread: viewtopic.php?t=20920
“Temporarily clear or disable custom outbound caller ID on the trunk and test again”
That may be worth trying though since some have reported calls failing based on certain characters in outbound CID name being rejected.
[FreePBX issue during call platform migration] all circuits busy
-
Liptonbrisk
- Technical Support
- Posts: 3715
- Joined: 04/26/2010
- SIP Device Name: Obihai 202/2182, Groundwire
- Firmware Version: various
- ISP Name: no CGNAT
- Computer OS: Windows 11 Pro (25H2)
- Router: Asuswrt-Merlin & others
Re: [FreePBX issue during call platform migration] all circuits busy
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.