AGEphone Mobile for Windows Mobile

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

AGEphone Mobile for Windows Mobile

Postby FreePhoneUser » 05/05/2010

Hello. I wanted to share my successful configuration of AGEphone Mobile 2.9.1.2 http://www.ageet.com/us/products-agephone-mobile.htm

Open Program.
Goto Settings, then goto SIP Accounts. Choose add.

Realm: freephoneline.ca
SIP Domain: voip.freephoneline.ca
SIP Server: voip.freephoneline.ca
Registrar: 208.65.240.142

Click Next

User Name: Your 10-digit Freephoneline number with a "1" in front.
Authorization: Same as above.
Display Name: Your name or your phone number.
Password: As provided by FPL.

Click Next.

No need to change anything.

Click Next.

No need to change anything.

Click Finish.
FreePhoneUser
Quiet One
 
Posts: 31
Joined: 05/05/2010
SIP Device Name: PAP2
Firmware Version: 3.1.23
ISP Name: Rogers Cable
Computer OS: Windows 7

Re: AGEphone Mobile for Windows Mobile

Postby FreePhoneUser » 08/17/2010

Just wanted to add that if you're having "Port restricted" errors you should try the following:

Goto Settings -> Netowrk -> Change "NAT Traversal" to "Local IP"
FreePhoneUser
Quiet One
 
Posts: 31
Joined: 05/05/2010
SIP Device Name: PAP2
Firmware Version: 3.1.23
ISP Name: Rogers Cable
Computer OS: Windows 7


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 19 guests

cron