SPA2102 (Firmware 5.2.13.004)

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

SPA2102 (Firmware 5.2.13.004)

Postby Jake » 07/15/2014

Credits to Val, thank you for your help.

The attached PDF will help you set up your SPA2102 (Firmware 5.2.13.004) device from scratch. It is a known working configuration so if you are having troubles with your SPA2102 (Firmware 5.2.13.004) reset back to defaults and follow this guide.

Edit:
1) Navigate to Voice-->SIP-->SIP Timer Values (sec)
a. Reg Retry Intvl should be changed to 120 seconds
https://support.freephoneline.ca/hc/en- ... redentials
("Failed Registration Re-Try Interval: 120 seconds")


b.Mango suggests the SIP T1 default setting is too aggressive, and to help resolve potential registration issues, T1 should be set to 1.
Navigate to Voice-->SIP-->SIP Timer Values-->SIP T1
Change SIP T1 to 1


2) In your SPA2102, Navigate to the SIP tab-->NAT Support Parameters, and make sure that the following settings are enabled:

a)Handle VIA received-->yes
b)Handle VIA rport-->yes
c)Substitute VIA Addr-->yes

3. In your SPA2102, Navigate to Line 1 (or whatever you're using for FPL)-->SIP settings, and change SIP Port to a random number between 30000 and 60000. Do this for security reasons (to help avoid SIP Scanners/hackers). Also, this step may help to temporarily address a corrupted NAT association that's developed between a router and ATA (if you're having registration issues, try selecting a new random port number in this range, and then reboot the ATA. If that works, you were dealing with a corrupted/stale NAT association in your router).

4. In your ATA, navigate to Voice-->Line (whichever you use for FPL)-->Supplementary Service Subscription-->Block CID Serv:
a) change to no
b) Click "submit"
Do this to avoid 15 minute call disconnections.
Attachments
Linksys SPA2102 ATA Config FreePhoneLine 5.2.13.pdf
(325.07 KiB) Downloaded 2121 times
User avatar
Jake
Technical Support
 
Posts: 2783
Joined: 10/18/2009

Re: SPA2102 (Firmware 5.2.13.004)

Postby Mango » 01/16/2015

To prevent one-way or no audio with the new FPL switches, set the following on the Voice >> SIP tab:

Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes
Mango
Tried and True
 
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato

Re: SPA2102 (Firmware 5.2.13.004)

Postby Liptonbrisk » 11/28/2017

In addition to what Mango wrote . . .
Having issues with one way-audio or calls going directly to voicemail?
Click https://forums.redflagdeals.com/freepho ... #p26808549 (same instructions apply)
Do not do step 8 from that link.

Also, navigate to Voice-->SIP-->SIP Timer Values (sec)
Reg Retry Intvl should be 120 seconds
https://support.freephoneline.ca/hc/en- ... redentials
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/en-us/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at viewforum.php?f=15.
User avatar
Liptonbrisk
Technical Support
 
Posts: 2414
Joined: 04/26/2010
SIP Device Name: OBi202 & others
Firmware Version: 3.2.2 (Build:8680EX)
ISP Name: Cable
Computer OS: Windows 10 x64 Pro
Router: Asuswrt-Merlin

Re: SPA2102 (Firmware 5.2.13.004)

Postby ger482 » 12/19/2021

does anyone have the spa2102 firmware 5.2.13 .I can't find it any longer on the net. thanks
ger482
Quiet One
 
Posts: 26
Joined: 02/15/2011

Re: SPA2102 (Firmware 5.2.13.004)

Postby hanke » 12/19/2021

I have attached the file, but site wont let my upload a zip file so i renamed it to a txt file. Download it and then rename by just removing the .txt. Hopefully it will work for you..
Attachments
SPA2102_5.2.13_FW_latest.zip.txt
Rename the file by removing the (.txt) so it ends only with zip.
(2.09 MiB) Downloaded 153 times
hanke
Lightly Seasoned
 
Posts: 193
Joined: 06/09/2010
Location: Burlington, Ontario
SIP Device Name: SPA3102
Firmware Version: 5.2.13(GW002)
ISP Name: Cogeco Cable
Router: DPC3848VM (Modem/Router)


Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 2 guests