SPA2102 (Firmware 5.2.13.004)

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
DISCLAIMER
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

SPA2102 (Firmware 5.2.13.004)

Post by Jake »

Credits to Val, thank you for your help.

The attached PDF will help you set up your SPA2102 (Firmware 5.2.13.004) device from scratch. It is a known working configuration so if you are having troubles with your SPA2102 (Firmware 5.2.13.004) reset back to defaults and follow this guide.

Edit by LiptonBrisk:
1) Navigate to Voice tab-->SIP tab-->SIP Timer Values (sec)
a. Reg Retry Intvl should be changed to 120 seconds
https://support.freephoneline.ca/hc/en- ... redentials
("Failed Registration Re-Try Interval: 120 seconds")


b.Mango suggests the SIP T1 default setting is too aggressive, and to help resolve potential registration issues, T1 should be set to 1.
Navigate to Voice tab -->SIP tab-->SIP Timer Values-->SIP T1
Change SIP T1 to 1


2) In your SPA2102, Navigate to the SIP tab-->NAT Support Parameters, and make sure that the following settings are enabled:

a)Handle VIA received-->yes
b)Handle VIA rport-->yes
c)Substitute VIA Addr-->yes

3. In your SPA2102, Navigate to Line 1 (or whatever you're using for FPL)-->SIP settings, and change SIP Port to a random number between 30000 and 60000. Do this for security reasons (to help avoid SIP Scanners/hackers). Also, this step may help to temporarily address a corrupted NAT association that's developed between a router and ATA (if you're having registration issues, try selecting a new random port number in this range, and then reboot the ATA. If that works, you were dealing with a corrupted/stale NAT association in your router).

Never use UDP 5060 for local SIP Port, and don't use the same UDP port number for the SIP port on any other Line.

4. In your ATA, navigate to Voice tab-->Line tab (whichever you use for FPL)-->Supplementary Service Subscription-->Block CID Serv:
a) change to no
b) Click "submit"
Do this to avoid 15 minute call disconnections.

5.Navigate to Line (being used for FPL) tab-->Dial Plan
a) Use ([2345689]11|988|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxx.|*98)
You do not have the required permissions to view the files attached to this post.
Mango
Tried and True
Posts: 411
Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato

Re: SPA2102 (Firmware 5.2.13.004)

Post by Mango »

To prevent one-way or no audio with the new FPL switches, set the following on the Voice >> SIP tab:

Handle VIA received: yes
Handle VIA rport: yes
Substitute VIA Addr: yes
ger482
Quiet One
Posts: 26
Joined: 02/15/2011

Re: SPA2102 (Firmware 5.2.13.004)

Post by ger482 »

does anyone have the spa2102 firmware 5.2.13 .I can't find it any longer on the net. thanks
hanke
Lightly Seasoned
Posts: 197
Joined: 06/09/2010
SIP Device Name: SPA3102
Firmware Version: 5.2.13(GW002)
ISP Name: Cogeco Cable
Router: DPC3848VM (Modem/Router)
Location: Burlington, Ontario

Re: SPA2102 (Firmware 5.2.13.004)

Post by hanke »

I have attached the file, but site wont let my upload a zip file so i renamed it to a txt file. Download it and then rename by just removing the .txt. Hopefully it will work for you..
You do not have the required permissions to view the files attached to this post.
User avatar
Liptonbrisk
Technical Support
Posts: 3068
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: SPA2102 (Firmware 5.2.13.004)

Post by Liptonbrisk »

hanke wrote:I have attached the file, but site wont let my upload a zip file so i renamed it to a txt file. Download it and then rename by just removing the .txt. Hopefully it will work for you..
Thank you.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.
lawlietl
One Hit Wonder
Posts: 1
Joined: 03/16/2018
SIP Device Name: SPA2102
Computer OS: windows 10

Re: SPA2102 (Firmware 5.2.13.004)

Post by lawlietl »

Thank you so much Jake

"Never use UDP 5060 for local SIP Port, and don't use the same UDP port number for the SIP port on any other Line."

i spent 2 months retrying to resolve this issue ...you a life saver thank you much...

i had this setting for almost 10 years only in the last 2 months the calls and incoming calls wasn't working
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: SPA2102 (Firmware 5.2.13.004)

Post by Jake »

I can't take credit for any of that.

A contributor, Val, supplied the initial guide, and LiptonBrisk provided the edit you referred to. Thanks goes to them both, not me.

My post was merely the vessel for their greatness and knowledge :)
User avatar
Liptonbrisk
Technical Support
Posts: 3068
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: SPA2102 (Firmware 5.2.13.004)

Post by Liptonbrisk »

Thank you, Jake, for posting the guides and for the work you do here.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.