When someone tries to call me, they get a busy signal after 1 ring. After I pick up my phone and call someone, everything goes back to normal and people can call me once again. The next day when people try to call me, they get a busy signal once again.
Any ideas?
ATA: PAP2T (5.1.6(LS))
Router: DIR-615 C1 w/ DD-WRT
Busy signal
-
noroger
- Just Passing Thru
- Posts: 4
- Joined: 07/06/2010
- ISP Name: Acanac DSL
- Computer OS: Windows 7
- Router: DIR-615 on dd-wrt
-
Jake
- Technical Support
- Posts: 2837
- Joined: 10/18/2009
Re: Busy signal
try changing the registration time down to 60 in the ATA. This helped me.
-
noroger
- Just Passing Thru
- Posts: 4
- Joined: 07/06/2010
- ISP Name: Acanac DSL
- Computer OS: Windows 7
- Router: DIR-615 on dd-wrt
Re: Busy signal
I believe I have found the issue. So far the phone has been working when connected directly to the ATA, i'll confirm this 100% in a couple of days.
-
Bob
- Quiet One
- Posts: 29
- Joined: 10/02/2010
- SIP Device Name: PAP2
- ISP Name: Bell Fibe
- Location: Montreal, QC
Re: Busy signal
please, share what was the issuenoroger wrote:I believe I have found the issue. So far the phone has been working when connected directly to the ATA, i'll confirm this 100% in a couple of days.
-
noroger
- Just Passing Thru
- Posts: 4
- Joined: 07/06/2010
- ISP Name: Acanac DSL
- Computer OS: Windows 7
- Router: DIR-615 on dd-wrt
Re: Busy signal
The issue was a bad physical connection to one of the phones in the house after renovations.