Call reciever cannot hear anything when I call

Share your tips, tricks and best practise ideas for Fongo services in here!
jks
Just Passing Thru
Posts: 2
Joined: 06/28/2010
SIP Device Name: Pap2t
Firmware Version: 5.1.6(LS)
ISP Name: Rogers cable
Router: ASUS WL-520gu w/tomato 1.27

Call reciever cannot hear anything when I call

Post by jks »

I call my mother all the time using FPL. Then suddenly today when I called, she couldn't hear me. Theres no sound on her end at all. She has a bell landline.
I had no problem at all when i called another friend today after this incident, but it persists whenever i try to call my mother.

Is there anyway to fix this glitch?
I have been using FPL for about a year relatively problem free. Have ports forwarded on firewall and router.
Using PAP2T.

Thanks
skyeyesat
Just Passing Thru
Posts: 2
Joined: 01/11/2011
SIP Device Name: PAP2T
Firmware Version: 5.1.6(LS)
ISP Name: Rogers (Cable)
Computer OS: Linux (version13),Windows XP
Router: Dlink DL604

Re: Call reciever cannot hear anything when I call

Post by skyeyesat »

I have had this issue in the past with some numbers (usually cell but some exchanges in land line). Since the upgraded the server I can make calls and hear fine but the receiving party cannot hear me. I have had this issue twice before, once on my original setup and one other a couple of years ago. I resolved the issue in the config settings but I cannot remember what I did. I have no way of testing since my FPL is the only phone I have. When I get it figured out I will post my solution.