Calls drop within a minute
-
sjb190
- One Hit Wonder
- Posts: 1
- Joined: 01/24/2011
- SIP Device Name: Cisco ATA 186
- Firmware Version: Ver: v3.1.1 atasip
- ISP Name: Rogers
- Router: Cisco ASA 5505
Calls drop within a minute
I just purchased the ATA config (if that's what you call it) from FPL and I configured my Cisco ATA 186 Version: v3.1.1 atasip (Build 040629A) and everything seems to work fine with the exception that all the calls I make will drop around the 40 sec mark. The line clicks then goes dead for a few seconds and then I get a fast busy before it drops all together. I try calling back and I get a partial prerecorded message, at most two partial words and then fast busy. If I wait a few minutes it works again but for less that a minute. Has anyone experienced this issue and is there a fix.
-
tbrummell
- Tried and True
- Posts: 330
- Joined: 09/21/2010
- SIP Device Name: PIAF/Mitel/PolyCom/Cisco
- Firmware Version: Asterisk 1.8
- ISP Name: Rogers
- Computer OS: CentOS/Windows2008/Win7/Android
- Router: pfSense/Neoware thin client
- Location: Ottawa
Re: Calls drop within a minute
Forward port 5060 from your router to your ATA.
-
atshoom
- Just Passing Thru
- Posts: 3
- Joined: 02/04/2011
- SIP Device Name: Linksys SPA-2100
- Firmware Version: 3.2.5(d)
- ISP Name: ADSL Radioactif (over bell line)
- Computer OS: MacOs 10.6.6
- Router: Netgear DGND3300
Re: Calls drop within a minute
@sjb190
Was that the solution ?
I am experiencing similar problems.
Was that the solution ?
I am experiencing similar problems.