No ringing for incoming calls
-
hunter_u
- Just Passing Thru
- Posts: 9
- Joined: 09/03/2012
No ringing for incoming calls
I have just set up SPA112 for FPL. There is no problem to call other phones,but no ringing for incoming calls. When calling FPL using another phone, the FPl phone displaying a number is calling but without ringing. I am not using any router, but connect the ATA to the Bell Sagemcom moderm (Fast 2864). I forward the port 5060 to ATA, have NAT Mapping and NAT Keep Alive enabled. Cannot figure out what else I can try. Anybody can help? Thanks a lot!
-
hunter_u
- Just Passing Thru
- Posts: 9
- Joined: 09/03/2012
Re: No ringing for incoming calls
The issue was resolved. In ATA configuration, switching the Ring Waveform to Sinusoid fixed it.
-
TheHardy
- ***Übergod***
- Posts: 1632
- Joined: 08/13/2011
- SIP Device Name: FPL PC softphone (buggy)
- Firmware Version: 3.0.3.0
- ISP Name: Telus Optik
- Computer OS: Win7
- Router: Actiontec V1000H
- Smartphone Model: none
- Location: Surrey, BC
Re: No ringing for incoming calls
Another user also reported upgrading the firmware resolved a few of his issues ... just something to keep in mind and check out as time allows.
Hardy - Surrey, BC ~~ increasingly disgruntled FPL user ... comon, fix your stuff!
driver/webmaster - INCARTA Professional Delivery & Moving -- http://www.incarta.ca 604-594-7126
driver/webmaster - INCARTA Professional Delivery & Moving -- http://www.incarta.ca 604-594-7126