Issues configuring OBI202 with FPL SIP account

[mmbiker]

Need some serious help setting up my Obi202 with Freephoneline.ca SIP account:

here are my settings:
Service Provider Proxy Server = voip.freephoneline.ca
Service Provider Proxy Server Port = 5060
Outbound Proxy Server = voip.freephoneline.ca
Outbound Proxy Server Port = 5060
User Name = XXXXXXXXXX
Password = XXXXXXXXX
URI = "not sure what to put here"

Currently, my Obi202 is showing FPL account as "registered"

Any help will be appreciated! thx

[Jake]

I don't know anything about the OBI products, but someone wrote these that might help, although they are not for your specific ATA.

http://forum.fongo.com/viewtopic.php?f=15&t=3098
http://forum.fongo.com/viewtopic.php?f=15&t=3100

[senos]

My OBI202 work very well with FPL, excellent voice quality, and dozens of interesting and useful features

[mmbiker]

^^^ Could you share your config? What have I done wrong?

[senos]

^^^ Could you share your config? What have I done wrong?

Of course, but I need some time to prepare somehow.

[senos]

^^^ Could you share your config? What have I done wrong?

This manual is basic but works very well
http://forum.fongo.com/viewtopic.php?f=15&t=3098

[BCITMike]

Need some serious help setting up my Obi202 with Freephoneline.ca SIP account:

here are my settings:
Service Provider Proxy Server = voip.freephoneline.ca
Service Provider Proxy Server Port = 5060
Outbound Proxy Server = voip.freephoneline.ca
Outbound Proxy Server Port = 5060
User Name = XXXXXXXXXX
Password = XXXXXXXXX
URI = "not sure what to put here"

Currently, my Obi202 is showing FPL account as "registered"

Any help will be appreciated! thx

I put the same thing in the URI box as the User Name. Mine also shows "registered" and the GV's show "Connected". It makes and receives calls. Are you having problems?

[senos]

URI = "not sure what to put here"
Any help will be appreciated! thx

URI leave empty (tick on default)

[mmbiker]

Is still not working...

Anyone know how to reset obi202? I try the button underneath the device, but doesn't reset... I want to key in my own ip so I can control the traffic better. I have a Cisco ASA firewall that I can open up wide open in terms of port but i need to key in a static ip to obi202...

[senos]

Is still not working...

Anyone know how to reset obi202?...

System management>Reset configuration

It can be configured to reset just the voice or just the router settings

[senos]

Is still not working...

Anyone know how to reset obi202? I try the button underneath the device, but doesn't reset... I want to key in my own ip so I can control the traffic better. I have a Cisco ASA firewall that I can open up wide open in terms of port but i need to key in a static ip to obi202...

First of all, the obitalk website will undo changes that one makes
to the OBi202. So, either do all your changes via the obitalk website using
the expert interface, or don't register the obi202 device with the obitalk
website (or unregister it if you already have it registered).

[mmbiker]

Ok, I will give it a try later tonight.

Any idea how to key in my own IP??

I forgot to mention, when I try dialing, the automated message keep saying "this account is blocked"....

[senos]

Ok, I will give it a try later tonight.

Any idea how to key in my own IP??

I forgot to mention, when I try dialing, the automated message keep saying "this account is blocked"....

•Dial *** from the phone connected to the OBi202
•Enter 30#
•Press 1 to Enter a New Value
•Press 1# to Enable
•Press 1 to Save
•Hang up

You have just enabled web access configuration for your device.

Next we will acquire the IP address of your device, if you haven't already done so. You can acquire the IP of your device by:

Picking up the connected handset and dialing *** and then dialing 1

You should be provided with the current IP address of your OBihai device. If your IP is 0.0.0.0 please make sure that your device is properly connected to your network.

Once you have acquired your IP login to your device by using http://DEVICE_IP/. If this is your first time logging into your device you may be asked to enter a username and password. By default for admin login this should be:

User: admin
Password: admin

[mmbiker]

I finally got a static IP enter to my OBI202!

In the device webpage, I see this error in "SP1 Service Status":

Register Failed: 401 Unauthorized (server=208.65.240.44:5060; retrying)


I am using freephoneline.ca as my SIP provider, could it be the account itself??

[Fongo Support]

I finally got a static IP enter to my OBI202!

In the device webpage, I see this error in "SP1 Service Status":

Register Failed: 401 Unauthorized (server=208.65.240.44:5060; retrying)


I am using freephoneline.ca as my SIP provider, could it be the account itself??

Hi there,

please use the below as reference:

http://forum.fongo.com/viewtopic.php?f=15&t=3098
http://forum.fongo.com/viewtopic.php?f=15&t=3100

Let me know if there are any issues.

Thanks,