Outgoing call ID issue

[Bruthy]

Hi,

I just ported my number from Bell. Everything working fine except one issue. Intermittently, the outgoing call ID (number) is displayed as Unknown or 1-416-642-0882, and sometimes the number displayed correctly.
Please let me know if I can do anything on my side to resolve the issue.

Thanks in advance
BR

[drntcm]

I haven't ported my number over yet but I'm having a similar problem with just the FPL number on my ATA. When I call my cell, I get one of 3 scenarios:
- UNKNOWN
- BLOCKED
- (416) 642-0882

If I call another user of FPL, the Call ID seems to sent perfectly (both name and number).

[drntcm]

Looks like I figured out the problem. Could be that the Linksys/Sipura firmware is a bit buggy. I've confirmed that the same behaviour exists in SPA1001 and SPA2100. Even if Block CID Serv is set to no the last known state of the Call ID send is still remembered. So if you did *67 or *68 prior to changing this, it will just lock that setting in and you won't be able to change it. Furthermore, *68 is supposed to be the Block CID Deact Code but I've found that it acts like a toggle.

[FONGO_kris]

I believe there was a small discussion regarding this issue you're describing here: http://forum.freephoneline.ca/viewtopic.php?f=8&t=780&p

[gouriganeshanet]

Hi,

I am observing the same issue as above.

I just ported my number from Bell. Everything working fine except one issue.
Intermittently, the outgoing call ID (number) is displayed as

1. Call Calling
2. Some time the telephone number displays correctly as 1416 334 xxxx

Please let me know

Tx
Gourii..