Hi,
I noticed that for a few days i have the voicemail dialtone (choppy dialtone to signal that you have voicemail). I can still make outgoing calls however all incoming calls get routed according to my follow me settings.
On sip settings, it is registering my device as connected
Anyone experiencing the same?
outgoing works, vmail dialtone, incoming fwded
-
ebala
- Just Passing Thru
- Posts: 4
- Joined: 02/12/2013
- SIP Device Name: linksys spa3102
- Firmware Version: 3.3.6(GW)
- ISP Name: Start Communications
- Computer OS: win7
- Router: Dlink 524
-
Jake
- Technical Support
- Posts: 2837
- Joined: 10/18/2009
Re: outgoing works, vmail dialtone, incoming fwded
Do you have DND or call forwarding activated?
Try calling *73, and *79 and see if that helps.
Try calling *73, and *79 and see if that helps.
-
ebala
- Just Passing Thru
- Posts: 4
- Joined: 02/12/2013
- SIP Device Name: linksys spa3102
- Firmware Version: 3.3.6(GW)
- ISP Name: Start Communications
- Computer OS: win7
- Router: Dlink 524
Re: outgoing works, vmail dialtone, incoming fwded
Awesome. Thanks Jake! I power cycled, i reset my follow me settings as well.
just tried *73 and it worked! dialtone back to normal!
just tried *73 and it worked! dialtone back to normal!
-
ebala
- Just Passing Thru
- Posts: 4
- Joined: 02/12/2013
- SIP Device Name: linksys spa3102
- Firmware Version: 3.3.6(GW)
- ISP Name: Start Communications
- Computer OS: win7
- Router: Dlink 524
Re: outgoing works, vmail dialtone, incoming fwded
this happened to me again. fast dialtone and all incoming calls were forwarding, but outgoing was fine.
hit *73 again and it worked. there was a really quick power outtage last night which might have done it.
hit *73 again and it worked. there was a really quick power outtage last night which might have done it.