No busy signal or 'ringing'

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
joeschmoe
Just Passing Thru
Posts: 19
Joined: 06/22/2013
SIP Device Name: Linksys PAP2T-NA
Firmware Version: 5.1.6

No busy signal or 'ringing'

Post by joeschmoe »

So I set up my Linksys PAP2T-NA for the first time the other day, and it seems to be functional, but I have a somewhat weird problem. I get a dialtone at the beginning of the call... I enter the number I'm calling and the line goes silent... as in no busy signal, no phone ringing on the other side... just silent? any ideas? I'm guessing something wasn't configured properly?
Top
joeschmoe
Just Passing Thru
Posts: 19
Joined: 06/22/2013
SIP Device Name: Linksys PAP2T-NA
Firmware Version: 5.1.6

Re: No busy signal or 'ringing'

Post by joeschmoe »

Nevermind, I went over the settings listed in the pap2t-na thread below and now i have a ringing tone and busy tone etc... yay! :)
http://forum.fongo.com/viewtopic.php?f=15&t=310
Top

Return to “Community Support”