Busy signal after connecting for approx. 40 seconds

Have a question or problem with your Fongo Home Phone service? This forum is the place to get help from both staff and fellow community members.
Visit The Fongo Home Phone Support Knowledge-base for more.
ludedude
Just Passing Thru
Posts: 3
Joined: 11/19/2013
SIP Device Name: Grandstream HT701
ISP Name: Rogers Cable
Computer OS: vista
Router: Hitron CGN3

Busy signal after connecting for approx. 40 seconds

Post by ludedude »

I keep getting a busy signal after connecting for approx. 40 seconds. I've tried calling different numbers with the same result. I rebooted my modem and the Fongo adapter but the same thing is happening.
User avatar
Fongo Support
Site Moderator
Posts: 1689
Joined: 01/01/2013

Re: Busy signal after connecting for approx. 40 seconds

Post by Fongo Support »

ludedude wrote:I keep getting a busy signal after connecting for approx. 40 seconds. I've tried calling different numbers with the same result. I rebooted my modem and the Fongo adapter but the same thing is happening.
Hi there,

Can you please confirm that your Firmware on your Hitron is 4.2.4.1?

http://www.dslreports.com/forum/r288084 ... to-4.2.4.1

Let me know.

Thanks,
ludedude
Just Passing Thru
Posts: 3
Joined: 11/19/2013
SIP Device Name: Grandstream HT701
ISP Name: Rogers Cable
Computer OS: vista
Router: Hitron CGN3

Re: Busy signal after connecting for approx. 40 seconds

Post by ludedude »

The firmware is 4.2.4.1
ludedude
Just Passing Thru
Posts: 3
Joined: 11/19/2013
SIP Device Name: Grandstream HT701
ISP Name: Rogers Cable
Computer OS: vista
Router: Hitron CGN3

Re: Busy signal after connecting for approx. 40 seconds

Post by ludedude »

seems like this only happens on outbound calls only
User avatar
Fongo Support
Site Moderator
Posts: 1689
Joined: 01/01/2013

Re: Busy signal after connecting for approx. 40 seconds

Post by Fongo Support »

ludedude wrote:The firmware is 4.2.4.1
Hi there,

My recommendation is to put the Hitron in bridge mode and use your own wireless router.

That will resolve the issue.

Please try and let me know.

Thanks,