Configuration of FPL for Android?

Here you can post your own working configurations of hardware or software to share with other users who may be using the same device!
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
This forum is for those users who have already purchased a configuration file with the SIP settings needed to configure any SIP compatible device.

1. Please use this forum only as a means to share your configuration advice and guides for ATA devices and SIP clients that you are using with our service.
2. For any questions relating to device configuration, please use the other forum sections or post your question directly in the device topic that your question is meant for.
3. Please title your topics with only the name and model of your device so users can easily find the information they need.
4. Preferable format for posting here is compressing your screenshots of your successfully configured device into a .zip file, and post a brief description of the configuration.

Please stay on topic

Configuration of FPL for Android?

Postby syzuie » 12/11/2014

Anyone can guide me through setting up FPL with Android's native SIP?

I have purchased the $50 key and I can not get it to work,

issues: I recieve calls but I can not hear the other person
I can not make calls and I get the "Server Error, Please try again later" message.

Its really getting on my nerve as I can not find any solution?!!!
Just Passing Thru
Posts: 2
Joined: 12/09/2014
ISP Name: Wind Mobile

Re: Configuration of FPL for Android?

Postby bridonca » 12/11/2014

It seems that you have NAT issues with the router, and there is no easy solution. If you are using wifi, you can configure the router to forward certain ports to the phone, but the router might just not be capable of forwarding packets properly. You might need a new router, and if you do decide to get one, make sure it is capable of being flashed with DD-WRT.

If you are trying to do this through cell data, again, it is a NAT issue, but with the ISP, so you cannot replace that.

You might be able to get the audio routed correctly if you configure for a STUN server. STUN can tell what type of NAT is running, but it is not very useful in fixing the NAT problem.

The nuclear option is to set up a OpenVPN tunnel. You need a reliable OpenVPN server on the other end because you will be using it's NAT and IP. But at least it should be better than the NAT from your telco,
User avatar
Technical Support
Posts: 1211
Joined: 11/16/2009
SIP Device Name: Netgear WGR615V
Firmware Version: latest
ISP Name: Eastlink
Computer OS: XP

Return to Device Configuration Sharing

Who is online

Users browsing this forum: No registered users and 3 guests