voip4.freephoneline.ca still 6060?

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
da_123
Just Passing Thru
Posts: 6
Joined: 09/24/2011
SIP Device Name: SPA-2102
Firmware Version: 3.3.6
ISP Name: Teksavvy
Location: Kitchener

voip4.freephoneline.ca still 6060?

Post by da_123 »

I have an Obi 200, and am on Rogers using the Hiltron CGN3ACSMR.

When I switched to that Rogers modem, I had to go with voip4.freephoneline.ca on port 6060.

A couple days ago, I can no longer register with voip4.freephoneline.ca on 6060. Has something changed, or should I be looking at my side?

http://support.freephoneline.ca/entries ... redentials
User avatar
Liptonbrisk
Technical Support
Posts: 3332
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: voip4.freephoneline.ca still 6060?

Post by Liptonbrisk »

da_123 wrote:I have an Obi 200, and am on Rogers using the Hiltron CGN3ACSMR.

When I switched to that Rogers modem, I had to go with voip4.freephoneline.ca on port 6060.

A couple days ago, I can no longer register with voip4.freephoneline.ca on 6060. Has something changed, or should I be looking at my side?

http://support.freephoneline.ca/entries ... redentials
voip4.freephoneline.ca:6060 is still the same.

I would start by rebooting your Hitron and then your OBi.

And then double check your settings: http://forum.fongo.com/viewtopic.php?f=15&t=16196
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.