Display Name: What doesn't work

[FrostZone]

Well, I was setting up an ATA PAP2T-NA for a friend and started to think we had a bad ATA devive.

... not the case, the Display Name: Mr. & Mrs. Lewis is not acceptable. We get a dial tone but the call would not send.

the & symbol or the . is the problem. Therefore Dave Lewis is what we settled on.

just some information that might help someone trouble shoot their problem.

[FONGO_steve]

Moving this to the correct forum, please remember to read the rules!

[cu2o2o2]

Well, I was setting up an ATA PAP2T-NA for a friend and started to think we had a bad ATA devive.

... not the case, the Display Name: Mr. & Mrs. Lewis is not acceptable. We get a dial tone but the call would not send.

the & symbol or the . is the problem. Therefore Dave Lewis is what we settled on.

just some information that might help someone trouble shoot their problem.

The use of ampersand in display name not working is old news, anyway, thanks for the info. It does not work on most VOIP's (if not all), including FPL...however, I really hope this will change in the future!