ATA Configuration

Share your tips, tricks and best practise ideas for Fongo services in here!
Forum rules
Joe B
Active Poster
Posts: 59
Joined: 02/19/2010
SIP Device Name: Linksys SPA112
Firmware Version: 1.3.2 (014) May 9 20
ISP Name: Cogeco
Computer OS: windows 8
Router: Asus RT-AC68U
Smartphone Model: Galaxy S5
Location: Windsor

ATA Configuration

Post by Joe B »

If I reset my ATA to factory defaults does that remove the configuration that FPL put on when I bought it?
I have a linksys ATA PAP2T
Top
cu2o2o2
Lightly Seasoned
Posts: 227
Joined: 04/06/2010
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1
Location: Brampton, ON

Re: ATA Configuration

Post by cu2o2o2 »

Joe B wrote:If I reset my ATA to factory defaults does that remove the configuration that FPL put on when I bought it?
I have a linksys ATA PAP2T
Yes, if you reset it by dialing ****73738 1.
.

You agree to read my posts at your own risk.
Top
Joe B
Active Poster
Posts: 59
Joined: 02/19/2010
SIP Device Name: Linksys SPA112
Firmware Version: 1.3.2 (014) May 9 20
ISP Name: Cogeco
Computer OS: windows 8
Router: Asus RT-AC68U
Smartphone Model: Galaxy S5
Location: Windsor

Re: ATA Configuration

Post by Joe B »

Thanks, how do I put the configuration file back on?
Top
User avatar
FONGO_steve
Site Moderator
Posts: 2131
Joined: 07/16/2009
SIP Device Name: Grandstream 286 & 701
ISP Name: Worldline.ca
Computer OS: Windows 7 Ultimate / Mac OS X
Router: TR1043ND w/ DD-WRT Mega
Smartphone Model: Galaxy S3
Android Version: 4.0.4
Location: Cambridge

Re: ATA Configuration

Post by FONGO_steve »

Joe B wrote:Thanks, how do I put the configuration file back on?
Our device configuration section of the forum will have guides to assist with this
Steve
Fongo
Development Support Specialist.
Top
Joe B
Active Poster
Posts: 59
Joined: 02/19/2010
SIP Device Name: Linksys SPA112
Firmware Version: 1.3.2 (014) May 9 20
ISP Name: Cogeco
Computer OS: windows 8
Router: Asus RT-AC68U
Smartphone Model: Galaxy S5
Location: Windsor

Re: ATA Configuration

Post by Joe B »

Sounds easy, one more question. How would I get my voippassword? Not sure if I remember it.
Top
cu2o2o2
Lightly Seasoned
Posts: 227
Joined: 04/06/2010
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1
Location: Brampton, ON

Re: ATA Configuration

Post by cu2o2o2 »

Joe B wrote:Sounds easy, one more question. How would I get my voippassword? Not sure if I remember it.
There is a tab on your FPL portal that contains your FPL SIP profile.

And if you are unlucky like me, you were sent an email that contains both the FPL number and SIP password (if that email is compromised, your phoneline will have clones).
.

You agree to read my posts at your own risk.
Top
Joe B
Active Poster
Posts: 59
Joined: 02/19/2010
SIP Device Name: Linksys SPA112
Firmware Version: 1.3.2 (014) May 9 20
ISP Name: Cogeco
Computer OS: windows 8
Router: Asus RT-AC68U
Smartphone Model: Galaxy S5
Location: Windsor

Re: ATA Configuration

Post by Joe B »

Thanks for all the help, I do have the info now to reset my ATA and hopefully solve my issues of a busy signal on incoming calls.
Top

Return to “Tips & Tricks From Seasoned Users”