How to change time on ATA device?

Share your tips, tricks and best practise ideas for Fongo services in here!
snoopy_00
Just Passing Thru
Posts: 8
Joined: 08/14/2010
ISP Name: Teksavvy Cable
Computer OS: Windows XP
Router: Netgear WPN 824 v.2

How to change time on ATA device?

Post by snoopy_00 »

Hello,

How to change the time on the ata device? I am using linksys pap2t-na model?

Thanks,
cu2o2o2
Lightly Seasoned
Posts: 227
Joined: 04/06/2010
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1
Location: Brampton, ON

Re: How to change time on ATA device?

Post by cu2o2o2 »

snoopy_00 wrote:Hello,

How to change the time on the ata device? I am using linksys pap2t-na model?

Thanks,
I don't recall that there is a field to change the time per se on the PAP2T.

I use time.nist.gov and time-a.nist.gov as time servers for my PAP2T and router. :P
.

You agree to read my posts at your own risk.
laurent
*Go-To Guy*
Posts: 532
Joined: 08/06/2010
SIP Device Name: Grandstream HT-502
Firmware Version: 1.0.1.63
ISP Name: DSL TekSavvy
Computer OS: OSX Snow Leopard
Router: Linksys WRT54GL w/tomato

Re: How to change time on ATA device?

Post by laurent »

Check the web interface. Typically they synchronize with internet time serevrs, so you only need to make sure you have the correct time zone set.
OverDrive
Lightly Seasoned
Posts: 151
Joined: 06/09/2010
SIP Device Name: SPA3102
Firmware Version: 5.2.13(GW002)
ISP Name: Start Communications (off Cogeco)
Computer OS: 8
Router: TP-Link TL-WR1043ND (DD-WRT)

Re: How to change time on ATA device?

Post by OverDrive »

another one I use is tick.utoronto.ca
Adam Marshall
AJ Tek
snoopy_00
Just Passing Thru
Posts: 8
Joined: 08/14/2010
ISP Name: Teksavvy Cable
Computer OS: Windows XP
Router: Netgear WPN 824 v.2

Re: How to change time on ATA device?

Post by snoopy_00 »

cu2o2o2 wrote:
snoopy_00 wrote:Hello,

How to change the time on the ata device? I am using linksys pap2t-na model?

Thanks,
I don't recall that there is a field to change the time per se on the PAP2T.

I use time.nist.gov and time-a.nist.gov as time servers for my PAP2T and router. :P


Thank you cu2o2o2! Your server worked. :D :D :D :D :D