*67 to block callerid. How to unblock it now?

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
smartoakville
Just Passing Thru
Posts: 23
Joined: 11/04/2009

*67 to block callerid. How to unblock it now?

Post by smartoakville »

Ok folks.

So I wanted to make a few calls and block the callerid, so I tried the *67 and it worked. Problem now is that all calls show "unknown" to the person receiving it. With landlines it is on a "per use" basis, but looks like it blocked permanently my FPL.

Any ideas?

Thanks.
cu2o2o2
Lightly Seasoned
Posts: 227
Joined: 04/06/2010
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1
Location: Brampton, ON

Re: *67 to block callerid. How to unblock it now?

Post by cu2o2o2 »

smartoakville wrote:Ok folks.

So I wanted to make a few calls and block the callerid, so I tried the *67 and it worked. Problem now is that all calls show "unknown" to the person receiving it. With landlines it is on a "per use" basis, but looks like it blocked permanently my FPL.

Any ideas?

Thanks.
With a pap2t, *67 will permanently block caller ID on all outgoing calls. To unblock on a per call basis, dial *82 before the phone number.

To permanently unblock caller ID on all outgoing calls, dial *68. To block on a per call basis, dial *81 before the phone number.
.

You agree to read my posts at your own risk.
smartoakville
Just Passing Thru
Posts: 23
Joined: 11/04/2009

Re: *67 to block callerid. How to unblock it now?

Post by smartoakville »

MANY thanks. It worked!
cu2o2o2
Lightly Seasoned
Posts: 227
Joined: 04/06/2010
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1
Location: Brampton, ON

Re: *67 to block callerid. How to unblock it now?

Post by cu2o2o2 »

smartoakville wrote:MANY thanks. It worked!
You're welcome!

******************************************************
You should have posted this on the FAQ board.
.

You agree to read my posts at your own risk.